General
Test result summary
ERROR |
| | | |
ERROR |
| | | |
ERROR |
| | | |
ERROR |
| | | |
test3: Bitbake parsing (bitbake -p) |
parse_1 time |
17.0 s |
+0.07 s |
+0.4 % |
|
parse_2 time |
12.0 s |
+0.13 s |
+1.1 % |
|
parse_3 time |
2.5 s |
+0.05 s |
+2.3 % |
ERROR |
| | | |
test1: Build core-image-sato
ERROR
(CommandError)
...
NOTE: recipe createrepo-c-native-0.16.1-r0: task do_unpack: Succeeded
NOTE: recipe e2fsprogs-native-1.45.6-r0: task do_patch: Succeeded
NOTE: recipe binutils-native-2.35-r0: task do_patch: Succeeded
NOTE: recipe autoconf-native-2.69-r11: task do_configure: Succeeded
NOTE: recipe binutils-2.35-r0: task do_unpack: Succeeded
NOTE: recipe linux-yocto-5.8.13+gitAUTOINC+34775c20bc_5981001bf0-r0: task do_unpack: Succeeded
NOTE: Tasks Summary: Attempted 1225 tasks of which 0 didn't need to be rerun and 6 failed.
NOTE: The errors for this build are stored in /home/pokybuild/build-perf-test/build-9b56d0e2b4-20201106192536/tmp/log/error-report/error_report_20201106192649.txt
You can send the errors to a reports server by running:
send-error-report /home/pokybuild/build-perf-test/build-9b56d0e2b4-20201106192536/tmp/log/error-report/error_report_20201106192649.txt [-s server]
NOTE: The contents of these logs will be posted in public if you use the above command with the default server. Please ensure you remove any identifying or proprietary information when prompted before sending.
Summary: 6 tasks failed:
virtual:native:/home/pokybuild/yocto-worker/buildperf-ubuntu1604/build/meta/recipes-graphics/xorg-lib/libxtst_1.2.3.bb:do_populate_lic
virtual:native:/home/pokybuild/yocto-worker/buildperf-ubuntu1604/build/meta/recipes-graphics/xorg-lib/libice_1.0.10.bb:do_populate_lic
virtual:native:/home/pokybuild/yocto-worker/buildperf-ubuntu1604/build/meta/recipes-extended/groff/groff_1.22.4.bb:do_populate_lic
virtual:native:/home/pokybuild/yocto-worker/buildperf-ubuntu1604/build/meta/recipes-graphics/xorg-lib/libsm_1.2.3.bb:do_populate_lic
virtual:native:/home/pokybuild/yocto-worker/buildperf-ubuntu1604/build/meta/recipes-graphics/glslang/glslang_8.13.3743.bb:do_populate_lic
virtual:native:/home/pokybuild/yocto-worker/buildperf-ubuntu1604/build/meta/recipes-graphics/xorg-lib/libxft_2.3.3.bb:do_populate_lic
Summary: There were 6 ERROR messages shown, returning a non-zero exit code.
test12: Build virtual/kernel
ERROR
(CommandError)
...
NOTE: recipe linux-yocto-5.8.13+gitAUTOINC+34775c20bc_5981001bf0-r0: task do_deploy_source_date_epoch: Succeeded
NOTE: recipe libtirpc-native-1.2.6-r0: task do_configure: Succeeded
NOTE: recipe gtk-doc-native-1.33.0-r0: task do_compile: Succeeded
NOTE: recipe gcc-source-10.2.0-10.2.0-r0: task do_patch: Succeeded
NOTE: recipe mpfr-native-4.1.0-r0: task do_configure: Succeeded
NOTE: recipe perl-native-5.32.0-r0: task do_configure: Succeeded
NOTE: recipe libgpg-error-native-1.39-r0: task do_configure: Succeeded
NOTE: recipe elfutils-native-0.181-r0: task do_compile: Succeeded
NOTE: recipe ncurses-native-6.2-r0: task do_configure: Succeeded
NOTE: recipe bison-native-3.7.3-r0: task do_configure: Succeeded
NOTE: recipe sqlite3-native-3_3.33.0-r0: task do_compile: Succeeded
NOTE: Tasks Summary: Attempted 416 tasks of which 232 didn't need to be rerun and 1 failed.
NOTE: The errors for this build are stored in /home/pokybuild/build-perf-test/build-9b56d0e2b4-20201106192536/tmp/log/error-report/error_report_20201106192901.txt
You can send the errors to a reports server by running:
send-error-report /home/pokybuild/build-perf-test/build-9b56d0e2b4-20201106192536/tmp/log/error-report/error_report_20201106192901.txt [-s server]
NOTE: The contents of these logs will be posted in public if you use the above command with the default server. Please ensure you remove any identifying or proprietary information when prompted before sending.
Summary: 1 task failed:
/home/pokybuild/yocto-worker/buildperf-ubuntu1604/build/meta/recipes-kernel/linux/linux-yocto_5.8.bb:do_populate_lic
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
test13: Build core-image-sato with rm_work enabled
ERROR
(CommandError)
Command '['bitbake', '-R', '/home/pokybuild/build-perf-test/results-9b56d0e2b4-20201106192536/test13.tmp/postfile.conf', 'core-image-sato']' returned non-zero exit status 2 with output: usage: bitbake [options] [recipename/target recipe:do_task ...]
Executes the specified task (default is 'build') for a given set of target recipes (.bb files).
It is assumed there is a conf/bblayers.conf available in cwd or in BBPATH which
will provide the layer, BBFILES and other configuration information.
bitbake: error: unrecognized arguments: core-image-sato
test2: Run core-image-sato do_rootfs with sstate
ERROR
(CommandError)
...
NOTE: recipe binutils-2.35-r0: task do_unpack: Succeeded
NOTE: recipe m4-native-1.4.18-r0: task do_configure: Succeeded
NOTE: recipe binutils-native-2.35-r0: task do_unpack: Succeeded
NOTE: recipe linux-yocto-5.8.13+gitAUTOINC+34775c20bc_5981001bf0-r0: task do_unpack: Succeeded
NOTE: Tasks Summary: Attempted 1215 tasks of which 485 didn't need to be rerun and 8 failed.
NOTE: The errors for this build are stored in /home/pokybuild/build-perf-test/build-9b56d0e2b4-20201106192536/tmp/log/error-report/error_report_20201106193222.txt
You can send the errors to a reports server by running:
send-error-report /home/pokybuild/build-perf-test/build-9b56d0e2b4-20201106192536/tmp/log/error-report/error_report_20201106193222.txt [-s server]
NOTE: The contents of these logs will be posted in public if you use the above command with the default server. Please ensure you remove any identifying or proprietary information when prompted before sending.
Summary: 8 tasks failed:
virtual:native:/home/pokybuild/yocto-worker/buildperf-ubuntu1604/build/meta/recipes-graphics/xorg-lib/libxtst_1.2.3.bb:do_populate_lic
virtual:native:/home/pokybuild/yocto-worker/buildperf-ubuntu1604/build/meta/recipes-graphics/xorg-lib/libice_1.0.10.bb:do_populate_lic
virtual:native:/home/pokybuild/yocto-worker/buildperf-ubuntu1604/build/meta/recipes-extended/groff/groff_1.22.4.bb:do_populate_lic
virtual:native:/home/pokybuild/yocto-worker/buildperf-ubuntu1604/build/meta/recipes-graphics/glslang/glslang_8.13.3743.bb:do_populate_lic
virtual:native:/home/pokybuild/yocto-worker/buildperf-ubuntu1604/build/meta/recipes-graphics/spir/spirv-tools_2020.5.bb:do_populate_lic
virtual:native:/home/pokybuild/yocto-worker/buildperf-ubuntu1604/build/meta/recipes-graphics/xorg-lib/libsm_1.2.3.bb:do_populate_lic
virtual:native:/home/pokybuild/yocto-worker/buildperf-ubuntu1604/build/meta/recipes-graphics/xorg-lib/libxft_2.3.3.bb:do_populate_lic
virtual:native:/home/pokybuild/yocto-worker/buildperf-ubuntu1604/build/meta/recipes-devtools/nasm/nasm_2.15.05.bb:do_populate_lic
Summary: There were 8 ERROR messages shown, returning a non-zero exit code.
test3: Bitbake parsing (bitbake -p)
parse_1 time
17.0 s
+0.07 s (+0.4 %)
|
Test runs | 1 |
-/+ | -0.00 s / +0.00 s |
Min | 17.0 s |
Max | 17.0 s |
Stdev | nan |
|
|
|
parse_2 time
12.0 s
+0.13 s (+1.1 %)
|
Test runs | 1 |
-/+ | -0.00 s / +0.00 s |
Min | 12.0 s |
Max | 12.0 s |
Stdev | nan |
|
|
|
parse_3 time
2.5 s
+0.05 s (+2.3 %)
|
Test runs | 1 |
-/+ | -0.00 s / +0.00 s |
Min | 2.5 s |
Max | 2.5 s |
Stdev | nan |
|
|
|
test4: eSDK metrics
ERROR
(CommandError)
Command '['bitbake', '-c', 'do_populate_sdk_ext', 'core-image-sato']' returned non-zero exit status 2 with output: usage: bitbake [options] [recipename/target recipe:do_task ...]
Executes the specified task (default is 'build') for a given set of target recipes (.bb files).
It is assumed there is a conf/bblayers.conf available in cwd or in BBPATH which
will provide the layer, BBFILES and other configuration information.
bitbake: error: unrecognized arguments: core-image-sato