[ 0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a3f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000ad3a40-0x0000000000ad3a6f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000ad3a70-0x000000001ffd7fff] usable [ 0.000000] reserve setup_data: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000004] kvm-clock: using sched offset of 1765891553 cycles [ 0.000007] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000013] tsc: Detected 2599.996 MHz processor [ 0.001450] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.001501] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.009318] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf] [ 0.009626] ACPI: Early table checksum verification disabled [ 0.009648] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS ) [ 0.009659] ACPI: RSDT 0x000000001FFE240C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009672] ACPI: FACP 0x000000001FFE21EC 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009680] ACPI: DSDT 0x000000001FFE0040 0021AC (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009685] ACPI: FACS 0x000000001FFE0000 000040 [ 0.009689] ACPI: APIC 0x000000001FFE22E0 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009694] ACPI: HPET 0x000000001FFE2370 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009698] ACPI: MCFG 0x000000001FFE23A8 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009702] ACPI: WAET 0x000000001FFE23E4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009706] ACPI: Reserving FACP table memory at [mem 0x1ffe21ec-0x1ffe22df] [ 0.009708] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21eb] [ 0.009710] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.009711] ACPI: Reserving APIC table memory at [mem 0x1ffe22e0-0x1ffe236f] [ 0.009712] ACPI: Reserving HPET table memory at [mem 0x1ffe2370-0x1ffe23a7] [ 0.009714] ACPI: Reserving MCFG table memory at [mem 0x1ffe23a8-0x1ffe23e3] [ 0.009715] ACPI: Reserving WAET table memory at [mem 0x1ffe23e4-0x1ffe240b] [ 0.009888] Zone ranges: [ 0.009889] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.009892] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.009894] Normal empty [ 0.009895] Movable zone start for each node [ 0.009896] Early memory node ranges [ 0.009897] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.009899] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.009901] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.054612] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.054641] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.210640] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.211408] ACPI: PM-Timer IO Port: 0x608 [ 0.211429] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.211497] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.211502] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.211505] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.211507] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.211509] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.211511] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.211517] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.211519] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.211526] TSC deadline timer available [ 0.211528] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.211588] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.211591] Booting paravirtualized kernel on KVM [ 0.211594] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.211601] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.289850] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288 [ 0.289922] Built 1 zonelists, mobility grouping on. Total pages: 128727 [ 0.289926] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.290107] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.290170] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.349534] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.380317] Memory: 482196K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41280K reserved, 0K cma-reserved) [ 0.380435] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.380446] Kernel/User page tables isolation: enabled [ 0.380465] ftrace: allocating 47075 entries in 184 pages [ 0.393163] ftrace: allocated 184 pages with 4 groups [ 0.393276] Dynamic Preempt: full [ 0.401458] rcu: Preemptible hierarchical RCU implementation. [ 0.401462] rcu: RCU event tracing is enabled. [ 0.401463] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.401467] All grace periods are expedited (rcu_expedited). [ 0.401468] Trampoline variant of Tasks RCU enabled. [ 0.401469] Rude variant of Tasks RCU enabled. [ 0.401470] Tracing variant of Tasks RCU enabled. [ 0.401472] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.401473] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.408046] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.408266] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.408397] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.408415] random: crng init done [ 0.423928] Console: colour VGA+ 80x25 [ 0.599795] printk: console [ttyS0] enabled [ 0.600558] ACPI: Core revision 20220331 [ 0.601501] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.603289] APIC: Switch to symmetric I/O mode setup [ 0.604999] x2apic enabled [ 0.606058] Switched APIC routing to physical x2apic. [ 0.608540] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.609728] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.611719] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.613721] pid_max: default: 32768 minimum: 301 [ 0.614603] LSM: Security Framework initializing [ 0.614736] landlock: Up and running. [ 0.616727] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.617725] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.619899] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.620720] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.621722] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.622728] Spectre V2 : Mitigation: Retpolines [ 0.623721] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.624722] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.625721] Speculative Store Bypass: Vulnerable [ 0.626722] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.627721] MMIO Stale Data: Unknown: No mitigations [ 0.628721] SRBDS: Unknown: Dependent on hypervisor status [ 0.652703] Freeing SMP alternatives memory: 52K [ 0.653718] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.653979] cblist_init_generic: Setting adjustable number of callback queues. [ 0.654723] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.655776] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.656759] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.657757] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.658798] rcu: Hierarchical SRCU implementation. [ 0.659723] rcu: Max phase no-delay instances is 400. [ 0.661077] smp: Bringing up secondary CPUs ... [ 0.661901] x86: Booting SMP configuration: [ 0.662668] .... node #0, CPUs: #1 #2 #3 [ 0.663958] smp: Brought up 1 node, 4 CPUs [ 0.665428] smpboot: Max logical packages: 1 [ 0.665722] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 0.667020] devtmpfs: initialized [ 0.667943] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.668737] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.669775] pinctrl core: initialized pinctrl subsystem [ 0.672222] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.672980] thermal_sys: Registered thermal governor 'step_wise' [ 0.672984] thermal_sys: Registered thermal governor 'user_space' [ 0.673802] cpuidle: using governor menu [ 0.674718] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.674718] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.674718] PCI: Using configuration type 1 for base access [ 0.681842] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.706603] raid6: sse2x4 gen() 8173 MB/s [ 0.722911] raid6: sse2x2 gen() 9052 MB/s [ 0.739873] raid6: sse2x1 gen() 6429 MB/s [ 0.741726] raid6: using algorithm sse2x2 gen() 9052 MB/s [ 0.758915] raid6: .... xor() 6973 MB/s, rmw enabled [ 0.760724] raid6: using ssse3x2 recovery algorithm [ 0.761662] ACPI: Added _OSI(Module Device) [ 0.762724] ACPI: Added _OSI(Processor Device) [ 0.763543] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.763723] ACPI: Added _OSI(Processor Aggregator Device) [ 0.764723] ACPI: Added _OSI(Linux-Dell-Video) [ 0.765548] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.766723] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.768684] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.781991] ACPI: Interpreter enabled [ 0.782740] ACPI: PM: (supports S0 S3 S5) [ 0.783430] ACPI: Using IOAPIC for interrupt routing [ 0.783774] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.785723] PCI: Using E820 reservations for host bridge windows [ 0.787891] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.791655] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.792729] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.794784] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.795812] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.796809] PCI host bridge to bus 0000:00 [ 0.797606] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.798723] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.799723] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.801723] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.802724] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.803723] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.805724] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.806838] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.808502] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.811724] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.815723] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.834725] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.837724] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.841123] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.843729] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.846548] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.853727] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.856572] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.863754] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.869763] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.873757] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.883776] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.889964] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.890710] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.890718] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.907718] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.913728] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.927669] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.931998] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.935019] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.938713] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.942726] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.946660] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.950019] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.951473] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.960976] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.962273] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.962273] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.964718] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.967724] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.972165] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.976225] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.978245] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.979819] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.980846] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.981836] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.983856] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.984838] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.985835] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.987834] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.988770] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.989736] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.990735] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.991736] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.992735] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.993735] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.994736] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.996736] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.998566] SCSI subsystem initialized [ 1.000777] ACPI: bus type USB registered [ 1.000777] usbcore: registered new interface driver usbfs [ 1.000777] usbcore: registered new interface driver hub [ 1.001718] usbcore: registered new device driver usb [ 1.001718] pps_core: LinuxPPS API ver. 1 registered [ 1.001718] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.001718] PTP clock support registered [ 1.001770] Bluetooth: Core ver 2.22 [ 1.002328] NET: Registered PF_BLUETOOTH protocol family [ 1.002718] Bluetooth: HCI device and connection manager initialized [ 1.002718] Bluetooth: HCI socket layer initialized [ 1.002732] Bluetooth: L2CAP socket layer initialized [ 1.003670] Bluetooth: SCO socket layer initialized [ 1.003847] PCI: Using ACPI for IRQ routing [ 1.101762] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.102718] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.102718] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.105731] vgaarb: loaded [ 1.107828] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.108725] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.113903] clocksource: Switched to clocksource kvm-clock [ 1.132848] pnp: PnP ACPI init [ 1.133820] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.135533] pnp: PnP ACPI: found 6 devices [ 1.145771] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.147484] NET: Registered PF_INET protocol family [ 1.148400] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.150319] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.151794] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.153235] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.154686] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.156028] TCP: Hash tables configured (established 4096 bind 4096) [ 1.157294] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.158539] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.159950] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.163016] RPC: Registered named UNIX socket transport module. [ 1.164047] RPC: Registered udp transport module. [ 1.164816] RPC: Registered tcp transport module. [ 1.165565] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.166618] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.167617] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.169991] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.171098] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 1.172228] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.173307] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 1.174919] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.176889] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.178730] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.180544] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.182386] PCI: CLS 0 bytes, default 64 [ 1.183296] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 1.184787] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 1.189483] Initialise system trusted keyrings [ 1.190548] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 1.196787] NFS: Registering the id_resolver key type [ 1.197808] Key type id_resolver registered [ 1.198548] Key type id_legacy registered [ 1.201900] Key type cifs.idmap registered [ 1.212166] xor: automatically using best checksumming function avx [ 1.213449] Key type asymmetric registered [ 1.214176] Asymmetric key parser 'x509' registered [ 1.215065] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.216272] io scheduler mq-deadline registered [ 1.217097] io scheduler kyber registered [ 1.218525] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.220855] ACPI: button: Power Button [PWRF] [ 1.222528] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.225284] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.227888] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.230463] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.234009] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.235312] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 1.237204] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.238792] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.241986] Linux agpgart interface v0.103 [ 1.243018] ACPI: bus type drm_connector registered [ 1.244184] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.245243] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.258615] Console: switching to colour dummy device 80x25 [ 1.259994] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.259998] [drm] features: -context_init [ 1.262894] [drm] number of scanouts: 1 [ 1.267266] [drm] number of cap sets: 0 [ 1.268832] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 [ 1.273971] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called [ 1.305624] Console: switching to colour frame buffer device 160x50 [ 1.371008] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.376992] brd: module loaded [ 1.379639] loop: module loaded [ 1.380543] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.383859] virtio_blk virtio3: [vda] 1090932 512-byte logical blocks (559 MB/533 MiB) [ 1.388329] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 1.389856] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.392424] scsi host0: ahci [ 1.393338] scsi host1: ahci [ 1.394424] scsi host2: ahci [ 1.395534] scsi host3: ahci [ 1.396574] scsi host4: ahci [ 1.397658] scsi host5: ahci [ 1.398248] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 1.399637] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 1.401015] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 1.402369] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 1.403625] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 1.404861] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 1.408954] e100: Intel(R) PRO/100 Network Driver [ 1.409785] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.410711] e1000: Intel(R) PRO/1000 Network Driver [ 1.411514] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.412546] e1000e: Intel(R) PRO/1000 Network Driver [ 1.413439] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.414508] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.415521] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.416593] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.417792] ehci-pci: EHCI PCI platform driver [ 1.420226] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.421161] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.422823] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.433105] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.434711] hub 1-0:1.0: USB hub found [ 1.435405] hub 1-0:1.0: 6 ports detected [ 1.436403] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.437542] ohci-pci: OHCI PCI platform driver [ 1.438396] uhci_hcd: USB Universal Host Controller Interface driver [ 1.440502] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.441415] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.442853] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.444302] hub 2-0:1.0: USB hub found [ 1.446656] hub 2-0:1.0: 2 ports detected [ 1.448726] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.450004] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.451363] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.452946] hub 3-0:1.0: USB hub found [ 1.453656] hub 3-0:1.0: 2 ports detected [ 1.455487] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.456727] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.459209] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.461079] hub 4-0:1.0: USB hub found [ 1.461852] hub 4-0:1.0: 2 ports detected [ 1.462912] usbcore: registered new interface driver usb-storage [ 1.464028] usbcore: registered new interface driver usbserial_generic [ 1.465304] usbserial: USB Serial support registered for generic [ 1.466373] usbcore: registered new interface driver ftdi_sio [ 1.467379] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.468687] usbcore: registered new interface driver pl2303 [ 1.469638] usbserial: USB Serial support registered for pl2303 [ 1.470707] i8042: PNP: No PS/2 controller found. [ 1.472047] mousedev: PS/2 mouse device common for all mice [ 1.473595] rtc_cmos 00:04: RTC can wake from S4 [ 1.475525] rtc_cmos 00:04: registered as rtc0 [ 1.476434] rtc_cmos 00:04: setting system clock to 2022-12-29T00:40:06 UTC (1672274406) [ 1.477810] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.479566] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.480694] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 1.481863] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.487600] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.489276] intel_pstate: CPU model not supported [ 1.490213] sdhci: Secure Digital Host Controller Interface driver [ 1.491278] sdhci: Copyright(c) Pierre Ossman [ 1.492036] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.493106] usbcore: registered new interface driver usbhid [ 1.494050] usbhid: USB HID core driver [ 1.494904] u32 classifier [ 1.495354] input device check on [ 1.495964] Actions configured [ 1.496701] NET: Registered PF_INET6 protocol family [ 1.498097] Segment Routing with IPv6 [ 1.498744] In-situ OAM (IOAM) with IPv6 [ 1.499401] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.500527] NET: Registered PF_PACKET protocol family [ 1.501414] Bridge firewalling registered [ 1.502150] Key type dns_resolver registered [ 1.503178] NET: Registered PF_VSOCK protocol family [ 1.504451] IPI shorthand broadcast: enabled [ 1.505197] sched_clock: Marking stable (1306722650, 198438918)->(1729705426, -224543858) [ 1.511240] Loading compiled-in X.509 certificates [ 1.512509] Key type ._fscrypt registered [ 1.513199] Key type .fscrypt registered [ 1.513838] Key type fscrypt-provisioning registered [ 1.515264] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 1.522312] Key type encrypted registered [ 1.526914] printk: console [netcon0] enabled [ 1.527777] netconsole: network logging started [ 1.679741] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.742159] ata5: SATA link down (SStatus 0 SControl 300) [ 1.743197] ata2: SATA link down (SStatus 0 SControl 300) [ 1.744267] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.745954] ata1: SATA link down (SStatus 0 SControl 300) [ 1.747162] ata6: SATA link down (SStatus 0 SControl 300) [ 1.748365] ata4: SATA link down (SStatus 0 SControl 300) [ 1.749365] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.750425] ata3.00: applying bridge limits [ 1.751476] ata3.00: configured for UDMA/100 [ 1.754470] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.791164] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.792271] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.821676] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 1.824272] IP-Config: Complete: [ 1.824338] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.824864] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 1.828938] host=192.168.7.4, domain=, nis-domain=(none) [ 1.829981] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.829986] nameserver0=8.8.8.8 [ 1.832890] md: Waiting for all devices to be available before autodetect [ 1.833775] md: If you don't use raid, use raid=noautodetect [ 1.834502] md: Autodetecting RAID arrays. [ 1.835045] md: autorun ... [ 1.835416] md: ... autorun DONE. [ 1.838364] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.839470] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.840483] devtmpfs: mounted [ 1.842655] Freeing unused kernel image (initmem) memory: 1936K [ 1.844078] Write protecting the kernel read-only data: 22528k [ 1.846501] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.848288] Freeing unused kernel image (rodata/data gap) memory: 364K [ 1.849496] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled [ 1.958827] usb 1-2: new high-speed USB device number 3 using ehci-pci Starting udev /etc/rcS.d/S03systemd-udevd: line 76: /proc/sys/kernel/hotplug: No such file or directory Starting systemd-udevd version 252.4^ [ 2.100260] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 2.152932] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.301304] EXT4-fs (vda): re-mounted. Quota mode: disabled. [ 2.430749] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... X.Org X Server 1.21.1.4 X Protocol Version 11, Revision 0 Current Operating System: Linux qemux86-64 5.19.17-yocto-standard #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022 x86_64 Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 29 00:40:07 2022 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" D-BUS per-session daemon address is: unix:path=/tmp/dbus-Ew2AGCSLwX,guid=4aae83eb37c0efbbe8044a3963ace1e8 Using calibration data stored in /etc/pointercal.xinput [settings daemon] Forking. run with -n to prevent fork matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop Using calibration data stored in /etc/pointercal.xinput dbus-daemon[402]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=393 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[402]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDQORI1SETNNhLVy/qS4FjSXSwfSCgZ2rQtmpJ9LoO9H/U5AEwnRTNfRa/1fe4QuMQ54wWdL8r+oOlIv8bsTzrImUb3dDDCJSnwND59YxopnlKgcx/njT3dYSJ+OAOpRcBGhVKww7J0LkptlpmiAWeRRGZSd7xtIg7mupZxJOvO7wCdSbMuJCTf8boGe6aP9Lp7ItDEdUjL9HHgYAfSZu8jvYRSbv+Cz2gEa7gb28+fCZXKxNWZWTqn3nZKyzZ5o2abkGMrxF2/lh+EnGVtq1OoRSOpqtUTCCSccuD6x8aTavaR8MzxsLjDWokQceLbnz2Cf+cu6T365w81UupJqdhr root@qemux86-64 Fingerprint: SHA256:RJHMQCa03pziCQakrdx1IIfwInKyh/8AtVplWY0o2so dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ 4.028017] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.028545] Bluetooth: BNEP filters: protocol multicast [ 4.029009] Bluetooth: BNEP socket layer initialized ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.1 qemux86-64 /dev/ttyS0 qemux86-64 login: