[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.18-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 PREEMPT Mon Feb 26 20:12:37 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241264K/262144K available (10643K kernel code, 1425K rwdata, 2836K rodata, 464K init, 339K bss, 20880K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42214 entries in 124 pages [ 0.000000] ftrace: allocated 124 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000216] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000693] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.005633] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.013913] Console: colour dummy device 80x30 [ 0.015742] Calibrating delay loop... 657.81 BogoMIPS (lpj=3289088) [ 0.109131] CPU: Testing write buffer coherency: ok [ 0.110794] pid_max: default: 32768 minimum: 301 [ 0.112379] LSM: initializing lsm=capability,landlock,integrity [ 0.113052] landlock: Up and running. [ 0.116539] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.116618] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.165623] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.166680] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.167331] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.168499] Setting up static identity map for 0x8400 - 0x8458 [ 0.170367] rcu: Hierarchical SRCU implementation. [ 0.170435] rcu: Max phase no-delay instances is 1000. [ 0.185882] devtmpfs: initialized [ 0.204001] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.205498] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.205647] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.218082] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.222943] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.276241] Serial: AMBA PL011 UART driver [ 0.286040] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.287568] printk: console [ttyAMA0] enabled [ 0.322239] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.325530] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.328272] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.330638] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.337356] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.699009] raid6: int32x8 gen() 109 MB/s [ 1.038962] raid6: int32x4 gen() 144 MB/s [ 1.379725] raid6: int32x2 gen() 186 MB/s [ 1.718971] raid6: int32x1 gen() 105 MB/s [ 1.719516] raid6: using algorithm int32x2 gen() 186 MB/s [ 2.054897] raid6: .... xor() 266 MB/s, rmw enabled [ 2.055447] raid6: using intx1 recovery algorithm [ 2.060267] SCSI subsystem initialized [ 2.062141] usbcore: registered new interface driver usbfs [ 2.062855] usbcore: registered new interface driver hub [ 2.063531] usbcore: registered new device driver usb [ 2.068248] pps_core: LinuxPPS API ver. 1 registered [ 2.068615] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.069646] PTP clock support registered [ 2.073278] Advanced Linux Sound Architecture Driver Initialized. [ 2.090685] vgaarb: loaded [ 2.093991] clocksource: Switched to clocksource arm,sp804 [ 2.172469] NET: Registered PF_INET protocol family [ 2.174716] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.184600] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.185306] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.185879] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.186459] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 2.187073] TCP: Hash tables configured (established 2048 bind 2048) [ 2.188903] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.189571] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.192049] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.197019] RPC: Registered named UNIX socket transport module. [ 2.197491] RPC: Registered udp transport module. [ 2.197814] RPC: Registered tcp transport module. [ 2.198125] RPC: Registered tcp-with-tls transport module. [ 2.198475] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.199022] PCI: CLS 0 bytes, default 32 [ 2.200138] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.211808] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.218106] NFS: Registering the id_resolver key type [ 2.219942] Key type id_resolver registered [ 2.220268] Key type id_legacy registered [ 2.225827] Key type cifs.idmap registered [ 2.450456] xor: measuring software checksum speed [ 2.461479] arm4regs : 974 MB/sec [ 2.469864] 8regs : 1295 MB/sec [ 2.479294] 32regs : 1169 MB/sec [ 2.479704] xor: using function: 8regs (1295 MB/sec) [ 2.480880] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.481524] io scheduler mq-deadline registered [ 2.481940] io scheduler kyber registered [ 2.482673] io scheduler bfq registered [ 2.489214] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 2.491082] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 2.492964] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 2.495053] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 2.496667] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 2.497853] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 2.498954] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 2.499540] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 2.501431] versatile-pci 10001000.pci: PCI core found (slot 11) [ 2.503699] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 2.504794] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.505516] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.505963] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 2.506434] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 2.509300] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 2.510632] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 2.511133] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 2.511554] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 2.516189] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 2.516692] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 2.517163] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.517676] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.518874] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 2.519330] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 2.519724] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.520820] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 2.521265] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.522345] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 2.522819] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.524212] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 2.524699] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 2.525114] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.527311] PCI: bus0: Fast back to back transfers disabled [ 2.529274] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 2.530000] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 2.530690] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 2.531235] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 2.531717] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 2.532218] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 2.532711] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 2.533162] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 2.533626] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.534322] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 2.534772] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 2.535178] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 2.537168] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 2.540213] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 2.541726] clcd-pl11x: probe of 10120000.display failed with error -2 [ 2.545103] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 2.548558] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 2.550435] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 2.552911] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 2.556742] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.575915] random: crng init done [ 2.579421] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 2.580460] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.580510] [drm] features: -context_init [ 2.581592] [drm] number of scanouts: 1 [ 2.581914] [drm] number of cap sets: 0 [ 2.598637] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 2.733335] Console: switching to colour frame buffer device 160x50 [ 2.755762] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.768211] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 2.770607] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 2.833133] brd: module loaded [ 2.834403] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 2.840997] virtio_blk virtio3: [vda] 950762 512-byte logical blocks (487 MB/464 MiB) [ 2.861114] physmap-flash 34000000.flash: versatile/realview flash protection [ 2.879270] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 2.882473] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 2.883765] Intel/Sharp Extended Query Table at 0x0031 [ 2.885214] Using buffer write method [ 2.929821] smc91x: not found (-19). [ 2.930849] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 2.931477] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 2.968241] rtc-ds1307 0-0068: registered as rtc0 [ 2.977625] rtc-ds1307 0-0068: setting system clock to 2024-02-28T21:12:15 UTC (1709154735) [ 2.984287] rtc-pl031 101e8000.rtc: registered as rtc1 [ 2.985484] i2c_dev: i2c /dev entries driver [ 2.987027] versatile reboot driver registered [ 2.990107] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 2.999439] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 3.006520] leds-syscon 10000008.0.led: registered LED (null) [ 3.007816] leds-syscon 10000008.1.led: registered LED (null) [ 3.008746] leds-syscon 10000008.2.led: registered LED (null) [ 3.009675] leds-syscon 10000008.3.led: registered LED (null) [ 3.010610] leds-syscon 10000008.4.led: registered LED (null) [ 3.011549] leds-syscon 10000008.5.led: registered LED (null) [ 3.012478] leds-syscon 10000008.6.led: registered LED (null) [ 3.013423] leds-syscon 10000008.7.led: registered LED (null) [ 3.016009] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 3.018722] ledtrig-cpu: registered to indicate activity on CPUs [ 3.022043] usbcore: registered new interface driver usbhid [ 3.022511] usbhid: USB HID core driver [ 3.048624] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 3.066808] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 3.067390] aaci-pl041 10004000.aaci: FIFO 512 entries [ 3.068932] u32 classifier [ 3.069172] input device check on [ 3.069424] Actions configured [ 3.071295] NET: Registered PF_INET6 protocol family [ 3.099139] Segment Routing with IPv6 [ 3.099737] In-situ OAM (IOAM) with IPv6 [ 3.100920] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.106913] NET: Registered PF_PACKET protocol family [ 3.107993] Bridge firewalling registered [ 3.109483] Key type dns_resolver registered [ 3.110639] NET: Registered PF_VSOCK protocol family [ 3.162432] registered taskstats version 1 [ 3.205674] Key type .fscrypt registered [ 3.206043] Key type fscrypt-provisioning registered [ 3.215326] Btrfs loaded, zoned=no, fsverity=no [ 3.224750] Key type encrypted registered [ 3.229541] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.230192] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.231412] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.233731] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.235936] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.237268] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.239039] printk: console [netcon0] enabled [ 3.239498] netconsole: network logging started [ 3.707724] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 3.720393] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.720995] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.722287] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.774544] IP-Config: Complete: [ 3.774884] device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5 [ 3.775703] host=192.168.7.6, domain=, nis-domain=(none) [ 3.776086] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.776167] nameserver0=8.8.8.8 [ 3.784860] clk: Disabling unused clocks [ 3.785572] ALSA device list: [ 3.785883] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 3.792385] md: Waiting for all devices to be available before autodetect [ 3.792847] md: If you don't use raid, use raid=noautodetect [ 3.793259] md: Autodetecting RAID arrays. [ 3.793578] md: autorun ... [ 3.798800] md: ... autorun DONE. [ 3.921044] EXT4-fs (vda): mounted filesystem 69840340-bc87-4c84-878f-3a5747cf8637 r/w with ordered data mode. Quota mode: disabled. [ 3.922453] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.931292] devtmpfs: mounted [ 3.979884] Freeing unused kernel image (initmem) memory: 464K [ 3.980359] Kernel memory protection not selected by kernel config. [ 3.981110] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 7.797305] udevd[97]: starting version 3.2.14 [ 7.994491] udevd[98]: starting eudev-3.2.14 [ 14.846466] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 14.847439] clcd-pl11x: probe of 10120000.display failed with error -2 [ 14.849671] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 15.415414] amba 10100000.smc: deferred probe pending [ 15.416215] amba 10110000.mpmc: deferred probe pending [ 15.416528] amba 101e0000.sctl: deferred probe pending [ 15.416821] amba 101e1000.watchdog: deferred probe pending [ 15.417133] amba 101f0000.sci: deferred probe pending [ 15.417429] amba 101f4000.spi: deferred probe pending [ 15.417725] amba 1000a000.sci: deferred probe pending [ 15.418009] amba 10120000.display: deferred probe pending [ 33.665801] EXT4-fs (vda): re-mounted 69840340-bc87-4c84-878f-3a5747cf8637 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.18-yocto-standard #1 PREEMPT Mon Feb 26 20:12:37 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 28 21:12:57 2024 dropbear. (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-680bf7135ea737a659b01961fe3dcb19817201ad qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-KaWfKrB1jR,guid=f8ff2f06cba088ee450af85c65dfa1ec Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork Connection failure: Connection refused pa_context_connect() failed: Connection refused dbus-daemon[530]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=512 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[530]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry