[    1.449096] Console: switching to colour frame buffer device 160x50
[    1.491087] bochs-drm 0000:00:03.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    1.561818] brd: module loaded
[    1.563841] virtio_blk virtio1: 1/0/0 default/read/poll queues
[    1.578481] virtio_blk virtio1: [vda] 866792 512-byte logical blocks (444 MB/423 MiB)
[    1.609390] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    1.610723] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    1.617711] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    1.622101] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    1.622590] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.623286] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    1.633265] hub 1-0:1.0: USB hub found
[    1.635666] hub 1-0:1.0: 4 ports detected
[    1.641237] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.643949] hub 2-0:1.0: USB hub found
[    1.644886] hub 2-0:1.0: 4 ports detected
[    1.652851] goldfish_rtc 101000.rtc: registered as rtc0
[    1.654077] goldfish_rtc 101000.rtc: setting system clock to 2024-03-18T18:25:48 UTC (1710786348)
[    1.658494] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    1.664222] usbcore: registered new interface driver usbhid
[    1.666053] usbhid: USB HID core driver
[    1.667304] riscv-pmu-sbi: SBI PMU extension is available
[    1.669862] riscv-pmu-sbi: 16 firmware and 18 hardware counters
[    1.670748] riscv-pmu-sbi: Perf sampling/filtering is not supported as sscof extension is not available
[    1.675904] u32 classifier
[    1.676368]     input device check on
[    1.677257]     Actions configured
[    1.680058] NET: Registered PF_INET6 protocol family
[    1.698625] Segment Routing with IPv6
[    1.699381] In-situ OAM (IOAM) with IPv6
[    1.700828] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.705891] NET: Registered PF_PACKET protocol family
[    1.707334] Bridge firewalling registered
[    1.709207] Key type dns_resolver registered
[    1.711032] NET: Registered PF_VSOCK protocol family
[    1.734121] registered taskstats version 1
[    1.761547] Key type .fscrypt registered
[    1.762182] Key type fscrypt-provisioning registered
[    1.775261] Btrfs loaded, zoned=no, fsverity=no
[    1.817385] Key type encrypted registered
[    1.822156] printk: console [netcon0] enabled
[    1.822967] netconsole: network logging started
[    1.869228] IP-Config: Complete:
[    1.869883]      device=eth0, hwaddr=52:54:00:12:34:10, ipaddr=192.168.7.16, mask=255.255.255.0, gw=192.168.7.15
[    1.871058]      host=192.168.7.16, domain=, nis-domain=(none)
[    1.871756]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.871839]      nameserver0=8.8.8.8
[    1.877300] clk: Disabling unused clocks
[    1.883355] md: Waiting for all devices to be available before autodetect
[    1.884924] md: If you don't use raid, use raid=noautodetect
[    1.885854] md: Autodetecting RAID arrays.
[    1.886535] md: autorun ...
[    1.886981] md: ... autorun DONE.
[    1.917441] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.974527] EXT4-fs (vda): mounted filesystem 100e3bd3-5d83-468e-b1dc-0f7f1116fad5 r/w with ordered data mode. Quota mode: disabled.
[    1.976983] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.982004] devtmpfs: mounted
[    2.115993] input: QEMU QEMU USB Tablet as /devices/platform/soc/30000000.pci/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    2.116345] Freeing unused kernel image (initmem) memory: 2252K
[    2.119864] Run /sbin/init as init process
[    2.121444] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
[    2.252737] usb 1-2: new high-speed USB device number 3 using xhci_hcd
INIT: version 3.04 booting
[    2.421208] input: QEMU QEMU USB Keyboard as /devices/platform/soc/30000000.pci/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    2.489833] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
Starting udev
[    5.558312] udevd[125]: starting version 3.2.14
[    5.756879] udevd[126]: starting eudev-3.2.14
[    6.855385] EXT4-fs (vda): re-mounted 100e3bd3-5d83-468e-b1dc-0f7f1116fad5 r/w. Quota mode: disabled.
INIT: Entering runlevel: 5
Configuring network interfaces... Error: ipv4: Address already assigned.
Starting OpenBSD Secure Shell server: sshd
  generating ssh RSA host key...
  generating ssh ECDSA host key...
  generating ssh ED25519 host key...
done.
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 4.3+snapshot-95cc01dfc13b160ab2d6b941ce49e245e62008a0 qemuriscv64 hvc0

qemuriscv64 login: [   60.187355] loop: module loaded
[   67.630317] loop0: detected capacity change from 0 to 20480
[   74.534039] loop0: detected capacity change from 0 to 10240
[  282.364863] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  282.369526] scsi host0: scsi_debug: version 0191 [20210520]
[  282.369526]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[  282.386932] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  282.393474] scsi 0:0:0:0: Power-on or device reset occurred
[  282.425069] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[  282.431550] sd 0:0:0:0: [sda] Write Protect is off
[  282.441508] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  282.455756] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  282.457730] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[  282.523944] sd 0:0:0:0: [sda] Attached SCSI disk
[  284.811432]  sda: sda1 sda2 sda3 sda4
[  287.375006] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  290.996163] loop0: detected capacity change from 0 to 10240
[  291.622034]  loop0: p1
[  560.121668] loop0: detected capacity change from 0 to 8
[  748.782142] loop0: detected capacity change from 0 to 120
[  780.390705] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  780.392424] scsi host0: scsi_debug: version 0191 [20210520]
[  780.392424]   dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0
[  780.408593] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  780.415168] scsi 0:0:0:0: Power-on or device reset occurred
[  780.455131] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB)
[  780.464924] sd 0:0:0:0: [sda] Write Protect is off
[  780.476720] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  780.493281] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  780.495080] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[  780.567155] sd 0:0:0:0: [sda] Attached SCSI disk
[  782.296836] sd 0:0:0:0: [sda] Spinning up disk...
[  783.332766] .ready
[  783.938547] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  786.034776] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  786.035998] scsi host0: scsi_debug: version 0191 [20210520]
[  786.035998]   dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0
[  786.040113] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  786.044841] scsi 0:0:0:0: Power-on or device reset occurred
[  786.069728] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB)
[  786.075964] sd 0:0:0:0: [sda] Write Protect is off
[  786.085749] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  786.100046] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  786.101251] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[  786.148758] sd 0:0:0:0: [sda] Attached SCSI disk
[  788.036296] EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem
[  788.066534] EXT4-fs (sda): mounted filesystem c3b12f95-ab28-4257-a042-4337d4097653 r/w without journal. Quota mode: disabled.
[  788.386130] EXT4-fs (sda): unmounting filesystem c3b12f95-ab28-4257-a042-4337d4097653.
[  789.430175] sd 0:0:0:0: [sda] Spinning up disk...
[  790.464934] .ready
[  790.953091] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  793.170745] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  793.171958] scsi host0: scsi_debug: version 0191 [20210520]
[  793.171958]   dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0
[  793.175752] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  793.180375] scsi 0:0:0:0: Power-on or device reset occurred
[  793.205300] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB)
[  793.211566] sd 0:0:0:0: [sda] Write Protect is off
[  793.221304] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  793.235485] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  793.237539] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[  793.285508] sd 0:0:0:0: [sda] Attached SCSI disk
[  794.569796]  sda: sda1 sda2
[  796.513753] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[  796.535377] EXT4-fs (sda1): mounted filesystem 0d4335c5-cfaf-4ee5-8393-2377bf02b50a r/w without journal. Quota mode: disabled.
[  796.768616] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[  796.792325] EXT4-fs (sda2): mounted filesystem f4f3e3a0-b0eb-4cf8-a5b2-fb20e69eb915 r/w without journal. Quota mode: disabled.
[  797.185813] EXT4-fs (sda2): unmounting filesystem f4f3e3a0-b0eb-4cf8-a5b2-fb20e69eb915.
[  797.321615] EXT4-fs (sda1): unmounting filesystem 0d4335c5-cfaf-4ee5-8393-2377bf02b50a.
[  798.368681] sd 0:0:0:0: [sda] Spinning up disk...
[  799.396734] .ready
[  799.441699]  sda: sda1 sda2
[  799.845205] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  801.994844] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  801.996039] scsi host0: scsi_debug: version 0191 [20210520]
[  801.996039]   dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0
[  802.000427] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  802.005437] scsi 0:0:0:0: Power-on or device reset occurred
[  802.030879] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB)
[  802.037455] sd 0:0:0:0: [sda] Write Protect is off
[  802.046821] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  802.060974] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  802.062226] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[  802.106802] sd 0:0:0:0: [sda] Attached SCSI disk
[  803.481134]  sda: sda1 sda2
[  806.175441] sd 0:0:0:0: [sda] Spinning up disk...
[  807.200785] .ready
[  807.245974]  sda: sda1 sda2
[  807.717082] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  809.932617] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  809.933871] scsi host0: scsi_debug: version 0191 [20210520]
[  809.933871]   dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0
[  809.937672] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  809.942047] scsi 0:0:0:0: Power-on or device reset occurred
[  809.968896] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB)
[  809.975777] sd 0:0:0:0: [sda] Write Protect is off
[  809.986361] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  810.000961] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  810.002062] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[  810.046914] sd 0:0:0:0: [sda] Attached SCSI disk
[  811.376718]  sda: sda1 sda2
[  812.119624] hrtimer: interrupt took 86200 ns
[  813.351297] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[  813.373302] EXT4-fs (sda1): mounted filesystem 376bc0c7-e839-4aad-bc6f-0303093947c2 r/w without journal. Quota mode: disabled.
[  813.585270] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[  813.603144] EXT4-fs (sda2): mounted filesystem 95a1ec87-fe33-452f-ba19-6d9ccd0748b2 r/w without journal. Quota mode: disabled.
[  813.938226] EXT4-fs (sda2): unmounting filesystem 95a1ec87-fe33-452f-ba19-6d9ccd0748b2.
[  814.107563] EXT4-fs (sda1): unmounting filesystem 376bc0c7-e839-4aad-bc6f-0303093947c2.
[  815.157472] sd 0:0:0:0: [sda] Spinning up disk...
[  816.192852] .ready
[  816.236324]  sda: sda1 sda2
[  816.705265] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  825.867691] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  825.869230] scsi host0: scsi_debug: version 0191 [20210520]
[  825.869230]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[  825.872908] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  825.877367] scsi 0:0:0:0: Power-on or device reset occurred
[  825.901738] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[  825.902861] sd 0:0:0:0: [sda] 4096-byte physical blocks
[  825.908714] sd 0:0:0:0: [sda] Write Protect is off
[  825.918100] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  825.932009] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[  825.933152] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[  825.976905] sd 0:0:0:0: [sda] Attached SCSI disk
[  828.555511]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[  829.870838] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  834.224459] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  834.225869] scsi host0: scsi_debug: version 0191 [20210520]
[  834.225869]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[  834.237518] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  834.243466] scsi 0:0:0:0: Power-on or device reset occurred
[  834.273473] sd 0:0:0:0: [sda] physical block alignment offset: 3584
[  834.274973] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[  834.276054] sd 0:0:0:0: [sda] 4096-byte physical blocks
[  834.282639] sd 0:0:0:0: [sda] Write Protect is off
[  834.292662] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  834.307386] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[  834.309471] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[  834.370588] sd 0:0:0:0: [sda] Attached SCSI disk
[  836.401584]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[  837.377494] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  840.763006] loop0: detected capacity change from 0 to 102400
[  845.419786] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  845.421308] scsi host0: scsi_debug: version 0191 [20210520]
[  845.421308]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[  845.424998] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  845.429675] scsi 0:0:0:0: Power-on or device reset occurred
[  845.453831] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[  845.460079] sd 0:0:0:0: [sda] Write Protect is off
[  845.470646] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  845.484937] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  845.485802] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[  845.532126] sd 0:0:0:0: [sda] Attached SCSI disk
[  847.523564]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[  848.673165] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  875.798810] loop0: detected capacity change from 0 to 20480
[  876.803872] loop0: detected capacity change from 20480 to 40960
[  877.260066]  loop0: p1 p2
[  998.115992] loop0: detected capacity change from 0 to 10240
[  998.686526] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  998.709103] EXT4-fs (loop0): mounted filesystem af48823e-a4de-4e1a-8e27-350123f51f93 r/w without journal. Quota mode: disabled.
[  998.892381] EXT4-fs (loop0): unmounting filesystem af48823e-a4de-4e1a-8e27-350123f51f93.
[ 1046.499839] NET: Registered PF_ALG protocol family
[ 1211.886323] loop0: detected capacity change from 0 to 20480
[ 1211.999385] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1212.040079] EXT4-fs (loop0): mounted filesystem 57fb13a3-3176-4d21-b894-c80283bbba3b r/w without journal. Quota mode: disabled.
[ 1212.199866] EXT4-fs (loop0): unmounting filesystem 57fb13a3-3176-4d21-b894-c80283bbba3b.
[ 1213.191659] loop0: detected capacity change from 0 to 20480
[ 1213.230149] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1213.240926] EXT4-fs (loop0): mounted filesystem 57fb13a3-3176-4d21-b894-c80283bbba3b r/w without journal. Quota mode: disabled.
[ 1213.328061] EXT4-fs (loop0): unmounting filesystem 57fb13a3-3176-4d21-b894-c80283bbba3b.
[ 1214.272887] loop0: detected capacity change from 0 to 20480
[ 1214.451398] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1214.467620] EXT4-fs (loop0): mounted filesystem 57fb13a3-3176-4d21-b894-c80283bbba3b r/w without journal. Quota mode: disabled.
[ 1214.742594] EXT4-fs (loop0): unmounting filesystem 57fb13a3-3176-4d21-b894-c80283bbba3b.
[ 1215.870147] loop0: detected capacity change from 0 to 20480
[ 1215.919387] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1215.933886] EXT4-fs (loop0): mounted filesystem 57fb13a3-3176-4d21-b894-c80283bbba3b r/w without journal. Quota mode: disabled.
[ 1216.157743] EXT4-fs (loop0): unmounting filesystem 57fb13a3-3176-4d21-b894-c80283bbba3b.
[ 1217.071450] loop0: detected capacity change from 0 to 20480
[ 1217.275239] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1217.291716] EXT4-fs (loop0): mounted filesystem 57fb13a3-3176-4d21-b894-c80283bbba3b r/w without journal. Quota mode: disabled.
[ 1217.539394] EXT4-fs (loop0): unmounting filesystem 57fb13a3-3176-4d21-b894-c80283bbba3b.
[ 1218.613880] loop0: detected capacity change from 0 to 20478
[ 1219.857009] loop0: detected capacity change from 0 to 20480
[ 1221.193027] loop0: detected capacity change from 0 to 20480
[ 1222.474741] loop0: detected capacity change from 0 to 20480
[ 1222.539860] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1222.550667] EXT4-fs (loop0): mounted filesystem 57fb13a3-3176-4d21-b894-c80283bbba3b r/w without journal. Quota mode: disabled.
[ 1222.739458] EXT4-fs (loop0): unmounting filesystem 57fb13a3-3176-4d21-b894-c80283bbba3b.
[ 1226.681182] loop0: detected capacity change from 0 to 20480
[ 1226.736716] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1226.780153] EXT4-fs (loop0): mounted filesystem bf63c85c-13b2-41f4-bba6-e919f20a2bcd r/w without journal. Quota mode: disabled.
[ 1227.082954] EXT4-fs (loop0): unmounting filesystem bf63c85c-13b2-41f4-bba6-e919f20a2bcd.
[ 1227.257232] loop0: detected capacity change from 0 to 10240
[ 1227.311141] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1227.325202] EXT4-fs (loop0): mounted filesystem bf63c85c-13b2-41f4-bba6-e919f20a2bcd r/w without journal. Quota mode: disabled.
[ 1227.447735] loop1: detected capacity change from 0 to 10240
[ 1227.494486] EXT4-fs (loop1): mounting ext2 file system using the ext4 subsystem
[ 1227.504742] EXT4-fs (loop1): mounted filesystem bf63c85c-13b2-41f4-bba6-e919f20a2bcd r/w without journal. Quota mode: disabled.
[ 1227.606519] EXT4-fs (loop0): unmounting filesystem bf63c85c-13b2-41f4-bba6-e919f20a2bcd.
[ 1227.780428] EXT4-fs (loop1): unmounting filesystem bf63c85c-13b2-41f4-bba6-e919f20a2bcd.
[ 1227.875831] loop0: detected capacity change from 0 to 10240
[ 1350.806623] loop0: detected capacity change from 0 to 20480
[ 1352.171802] loop0: detected capacity change from 0 to 18432
[ 1353.381493] loop0: detected capacity change from 0 to 6144
[ 1354.689590] loop0: detected capacity change from 0 to 6144
[ 1359.891485] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[ 1359.895929] scsi host0: scsi_debug: version 0191 [20210520]
[ 1359.895929]   dev_size_mb=11, opts=0x0, submit_queues=1, statistics=0
[ 1359.940239] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[ 1359.952103] scsi 0:0:0:0: Power-on or device reset occurred
[ 1360.000697] sd 0:0:0:0: [sda] 22528 512-byte logical blocks: (11.5 MB/11.0 MiB)
[ 1360.010160] sd 0:0:0:0: [sda] Write Protect is off
[ 1360.021732] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1360.042613] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1360.044424] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 1360.114856] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1361.071674] loop0: detected capacity change from 0 to 22528
[ 1362.464951] loop0: detected capacity change from 0 to 20480
[ 1363.765862] loop0: detected capacity change from 0 to 6144
[ 1365.498354] loop0: detected capacity change from 0 to 6144
[ 1367.433501] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1371.536814] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[ 1371.538841] scsi host0: scsi_debug: version 0191 [20210520]
[ 1371.538841]   dev_size_mb=11, opts=0x0, submit_queues=1, statistics=0
[ 1371.542987] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[ 1371.548077] scsi 0:0:0:0: Power-on or device reset occurred
[ 1371.577311] sd 0:0:0:0: [sda] 22528 512-byte logical blocks: (11.5 MB/11.0 MiB)
[ 1371.585634] sd 0:0:0:0: [sda] Write Protect is off
[ 1371.596340] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1371.611646] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1371.613223] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 1371.659370] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1372.513984] loop0: detected capacity change from 0 to 22528
[ 1372.721125] loop0: detected capacity change from 0 to 22528
[ 1374.254097] loop0: detected capacity change from 0 to 22528
[ 1375.493439] loop0: detected capacity change from 0 to 2048
[ 1375.587592] loop1: detected capacity change from 0 to 2048
[ 1376.755147] loop0: detected capacity change from 0 to 4096
[ 1378.318214] loop0: detected capacity change from 0 to 20480
[ 1380.392098] loop0: detected capacity change from 0 to 22528
[ 1382.712225] loop0: detected capacity change from 0 to 2048
[ 1382.879284] loop1: detected capacity change from 0 to 18432
[ 1385.035387] loop0: detected capacity change from 0 to 22528
[ 1387.441962] loop0: detected capacity change from 0 to 22528
[ 1390.342589] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1680.538819] loop0: detected capacity change from 0 to 10240
[ 1718.697944] UDPLite: UDP-Lite is deprecated and scheduled to be removed in 2025, please contact the netdev mailing list
[ 1724.642554] UDPLite6: UDP-Lite is deprecated and scheduled to be removed in 2025, please contact the netdev mailing list
[ 1915.793551] loop0: detected capacity change from 0 to 10240
[ 1918.537987] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1918.690423] EXT4-fs (loop0): mounted filesystem d04a13a4-d5a4-4f09-be5f-97fecc42be22 r/w without journal. Quota mode: disabled.
[ 1921.955229] EXT4-fs (loop0): re-mounted d04a13a4-d5a4-4f09-be5f-97fecc42be22 ro. Quota mode: disabled.
[ 1923.566062] EXT4-fs (loop0): re-mounted d04a13a4-d5a4-4f09-be5f-97fecc42be22 r/w. Quota mode: disabled.
[ 1926.838315] EXT4-fs (loop0): unmounting filesystem d04a13a4-d5a4-4f09-be5f-97fecc42be22.
[ 1930.722253] loop0: detected capacity change from 0 to 10240
[ 1931.390900] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1931.411696] EXT4-fs (loop0): mounted filesystem 691b7616-86d3-40e2-9ac4-729239ac3a2d r/w without journal. Quota mode: disabled.
[ 1931.927615] EXT4-fs (loop0): unmounting filesystem 691b7616-86d3-40e2-9ac4-729239ac3a2d.
[ 1942.449286] loop0: detected capacity change from 0 to 10240
[ 1943.609818] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1943.646366] EXT4-fs (loop0): mounted filesystem ee265f33-285e-43bb-9c5c-16f63636049e r/w without journal. Quota mode: disabled.
[ 1944.131727] EXT4-fs (loop0): unmounting filesystem ee265f33-285e-43bb-9c5c-16f63636049e.
[ 1945.305347] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1945.324153] EXT4-fs (loop0): mounted filesystem ee265f33-285e-43bb-9c5c-16f63636049e r/w without journal. Quota mode: disabled.
[ 1945.771958] EXT4-fs (loop0): unmounting filesystem ee265f33-285e-43bb-9c5c-16f63636049e.
[ 1946.919458] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1946.930707] EXT4-fs (loop0): mounted filesystem ee265f33-285e-43bb-9c5c-16f63636049e r/w without journal. Quota mode: disabled.
[ 1947.394295] EXT4-fs (loop0): re-mounted ee265f33-285e-43bb-9c5c-16f63636049e ro. Quota mode: disabled.
[ 1948.095652] EXT4-fs (loop0): unmounting filesystem ee265f33-285e-43bb-9c5c-16f63636049e.
[ 1952.748063] loop0: detected capacity change from 0 to 10240
[ 1953.659605] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1953.676007] EXT4-fs (loop0): mounted filesystem 1e2b8435-33c1-4165-8b8c-5101e129df53 r/w without journal. Quota mode: disabled.
[ 1954.056188] EXT4-fs (loop0): unmounting filesystem 1e2b8435-33c1-4165-8b8c-5101e129df53.
[ 1955.404161] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1955.432353] EXT4-fs (loop0): mounted filesystem 1e2b8435-33c1-4165-8b8c-5101e129df53 r/w without journal. Quota mode: disabled.
[ 1955.833910] EXT4-fs (loop0): unmounting filesystem 1e2b8435-33c1-4165-8b8c-5101e129df53.
[ 1957.459529] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1957.471672] EXT4-fs (loop0): mounted filesystem 1e2b8435-33c1-4165-8b8c-5101e129df53 r/w without journal. Quota mode: disabled.
[ 1958.112833] EXT4-fs (loop0): unmounting filesystem 1e2b8435-33c1-4165-8b8c-5101e129df53.
[ 1959.160187] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities
[ 1959.166233] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 1959.180104] EXT4-fs (loop0): mounted filesystem 1e2b8435-33c1-4165-8b8c-5101e129df53 r/w without journal. Quota mode: disabled.
[ 1959.543865] EXT4-fs (loop0): unmounting filesystem 1e2b8435-33c1-4165-8b8c-5101e129df53.
[ 1960.496002] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities
[ 1960.505878] FAT-fs (loop0): bogus number of reserved sectors
[ 1960.507199] FAT-fs (loop0): Can't find a valid FAT filesystem
[ 1965.706238] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[ 1965.711033] scsi host0: scsi_debug: version 0191 [20210520]
[ 1965.711033]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[ 1965.733321] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[ 1965.745436] scsi 0:0:0:0: Power-on or device reset occurred
[ 1965.783590] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[ 1965.791869] sd 0:0:0:0: [sda] Write Protect is off
[ 1965.803319] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1965.818927] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1965.820125] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 1965.878426] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1967.539342]  sda: sda1 sda2 sda3 sda4
[ 1970.437637] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 1970.458803] EXT4-fs (sda1): mounted filesystem eebd822b-18e2-4f19-8903-406096d972ba r/w without journal. Quota mode: disabled.
[ 1970.474997] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 1970.494597] EXT4-fs (sda2): mounted filesystem d8d840db-105e-4493-bbaf-5c079c8d9443 r/w without journal. Quota mode: disabled.
[ 1970.504115] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 1970.519895] EXT4-fs (sda3): mounted filesystem f3916fc0-635b-4c2e-bde7-47264fb8c323 ro without journal. Quota mode: disabled.
[ 1970.715353] EXT4-fs (sda4): mounted filesystem eb98880e-9868-415d-90a5-1bf642b79902 r/w with ordered data mode. Quota mode: disabled.
[ 1970.962871] EXT4-fs (sda1): unmounting filesystem eebd822b-18e2-4f19-8903-406096d972ba.
[ 1971.026659] EXT4-fs (sda2): unmounting filesystem d8d840db-105e-4493-bbaf-5c079c8d9443.
[ 1971.039697] EXT4-fs (sda3): unmounting filesystem f3916fc0-635b-4c2e-bde7-47264fb8c323.
[ 1971.093539] EXT4-fs (sda4): unmounting filesystem eb98880e-9868-415d-90a5-1bf642b79902.
[ 1972.163934] EXT4-fs (sda4): mounted filesystem eb98880e-9868-415d-90a5-1bf642b79902 r/w with ordered data mode. Quota mode: disabled.
[ 1972.450705] EXT4-fs (sda4): unmounting filesystem eb98880e-9868-415d-90a5-1bf642b79902.
[ 1973.364066] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 1973.388380] EXT4-fs (sda1): mounted filesystem eebd822b-18e2-4f19-8903-406096d972ba r/w without journal. Quota mode: disabled.
[ 1973.404281] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 1973.423097] EXT4-fs (sda2): mounted filesystem d8d840db-105e-4493-bbaf-5c079c8d9443 r/w without journal. Quota mode: disabled.
[ 1973.432404] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 1973.447886] EXT4-fs (sda3): mounted filesystem f3916fc0-635b-4c2e-bde7-47264fb8c323 ro without journal. Quota mode: disabled.
[ 1973.725786] EXT4-fs (sda1): unmounting filesystem eebd822b-18e2-4f19-8903-406096d972ba.
[ 1973.788760] EXT4-fs (sda2): unmounting filesystem d8d840db-105e-4493-bbaf-5c079c8d9443.
[ 1973.803906] EXT4-fs (sda3): unmounting filesystem f3916fc0-635b-4c2e-bde7-47264fb8c323.
[ 1974.880072] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 1974.895357] EXT4-fs (sda3): mounted filesystem f3916fc0-635b-4c2e-bde7-47264fb8c323 ro without journal. Quota mode: disabled.
[ 1975.147960] EXT4-fs (sda3): unmounting filesystem f3916fc0-635b-4c2e-bde7-47264fb8c323.
[ 1976.197958] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 1976.213742] EXT4-fs (sda1): mounted filesystem eebd822b-18e2-4f19-8903-406096d972ba ro without journal. Quota mode: disabled.
[ 1976.227933] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 1976.242430] EXT4-fs (sda2): mounted filesystem d8d840db-105e-4493-bbaf-5c079c8d9443 ro without journal. Quota mode: disabled.
[ 1976.254940] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 1976.269615] EXT4-fs (sda3): mounted filesystem f3916fc0-635b-4c2e-bde7-47264fb8c323 ro without journal. Quota mode: disabled.
[ 1976.453379] EXT4-fs (sda4): orphan cleanup on readonly fs
[ 1976.454698] EXT4-fs (sda4): mounted filesystem eb98880e-9868-415d-90a5-1bf642b79902 ro with ordered data mode. Quota mode: disabled.
[ 1976.692274] EXT4-fs (sda1): unmounting filesystem eebd822b-18e2-4f19-8903-406096d972ba.
[ 1976.702969] EXT4-fs (sda2): unmounting filesystem d8d840db-105e-4493-bbaf-5c079c8d9443.
[ 1976.707709] EXT4-fs (sda3): unmounting filesystem f3916fc0-635b-4c2e-bde7-47264fb8c323.
[ 1976.714168] EXT4-fs (sda4): unmounting filesystem eb98880e-9868-415d-90a5-1bf642b79902.
[ 1977.719063] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 1977.739997] EXT4-fs (sda1): mounted filesystem eebd822b-18e2-4f19-8903-406096d972ba r/w without journal. Quota mode: disabled.
[ 1977.757091] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 1977.797718] EXT4-fs (sda2): mounted filesystem d8d840db-105e-4493-bbaf-5c079c8d9443 r/w without journal. Quota mode: disabled.
[ 1977.811554] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 1977.828030] EXT4-fs (sda3): mounted filesystem f3916fc0-635b-4c2e-bde7-47264fb8c323 ro without journal. Quota mode: disabled.
[ 1978.053963] EXT4-fs (sda4): mounted filesystem eb98880e-9868-415d-90a5-1bf642b79902 r/w with ordered data mode. Quota mode: disabled.
[ 1978.330568] EXT4-fs (sda1): unmounting filesystem eebd822b-18e2-4f19-8903-406096d972ba.
[ 1978.390776] EXT4-fs (sda2): unmounting filesystem d8d840db-105e-4493-bbaf-5c079c8d9443.
[ 1978.401372] EXT4-fs (sda3): unmounting filesystem f3916fc0-635b-4c2e-bde7-47264fb8c323.
[ 1978.456394] EXT4-fs (sda4): unmounting filesystem eb98880e-9868-415d-90a5-1bf642b79902.
[ 1979.512184] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 1979.536979] EXT4-fs (sda1): mounted filesystem eebd822b-18e2-4f19-8903-406096d972ba r/w without journal. Quota mode: disabled.
[ 1979.552764] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 1979.574278] EXT4-fs (sda2): mounted filesystem d8d840db-105e-4493-bbaf-5c079c8d9443 r/w without journal. Quota mode: disabled.
[ 1979.587954] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 1979.608729] EXT4-fs (sda3): mounted filesystem f3916fc0-635b-4c2e-bde7-47264fb8c323 r/w without journal. Quota mode: disabled.
[ 1979.801087] EXT4-fs (sda4): mounted filesystem eb98880e-9868-415d-90a5-1bf642b79902 r/w with ordered data mode. Quota mode: disabled.
[ 1980.065432] EXT4-fs (sda1): unmounting filesystem eebd822b-18e2-4f19-8903-406096d972ba.
[ 1980.125287] EXT4-fs (sda2): unmounting filesystem d8d840db-105e-4493-bbaf-5c079c8d9443.
[ 1980.184877] EXT4-fs (sda3): unmounting filesystem f3916fc0-635b-4c2e-bde7-47264fb8c323.
[ 1980.244384] EXT4-fs (sda4): unmounting filesystem eb98880e-9868-415d-90a5-1bf642b79902.
[ 1981.433162] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1995.370042] loop0: detected capacity change from 0 to 102400
[ 1996.452138] BTRFS: device fsid 9341b58c-34fa-48f5-90b4-0374da935ab6 devid 1 transid 6 /dev/loop0 scanned by mkfs.btrfs (23525)
[ 1996.642909] loop1: detected capacity change from 0 to 102400
[ 1996.700172] BTRFS info (device loop1): first mount of filesystem 9341b58c-34fa-48f5-90b4-0374da935ab6
[ 1996.702685] BTRFS info (device loop1): using crc32c (crc32c-generic) checksum algorithm
[ 1996.705295] BTRFS info (device loop1): using free space tree
[ 1996.762388] BTRFS info (device loop1): enabling ssd optimizations
[ 1996.763604] BTRFS info (device loop1): auto enabling async discard
[ 1996.767824] BTRFS info (device loop1): checking UUID tree
[ 1997.550130] BTRFS info (device loop1): setting incompat feature flag for DEFAULT_SUBVOL (0x2)
[ 1998.021834] BTRFS info (device loop1): last unmount of filesystem 9341b58c-34fa-48f5-90b4-0374da935ab6
[ 1998.630430] BTRFS: device fsid 9341b58c-34fa-48f5-90b4-0374da935ab6 devid 1 transid 8 /dev/loop0 scanned by mount (23570)
[ 1998.637928] BTRFS info (device loop0): first mount of filesystem 9341b58c-34fa-48f5-90b4-0374da935ab6
[ 1998.639838] BTRFS info (device loop0): using crc32c (crc32c-generic) checksum algorithm
[ 1998.641673] BTRFS info (device loop0): using free space tree
[ 1998.676204] BTRFS info (device loop0): auto enabling async discard
[ 1999.186162] BTRFS info (device loop0): last unmount of filesystem 9341b58c-34fa-48f5-90b4-0374da935ab6
[ 2000.630995] BTRFS: device fsid 9341b58c-34fa-48f5-90b4-0374da935ab6 devid 1 transid 9 /dev/loop0 scanned by mount (23612)
[ 2000.635720] BTRFS info (device loop0): first mount of filesystem 9341b58c-34fa-48f5-90b4-0374da935ab6
[ 2000.637898] BTRFS info (device loop0): using crc32c (crc32c-generic) checksum algorithm
[ 2000.639234] BTRFS info (device loop0): using free space tree
[ 2000.668415] BTRFS info (device loop0): auto enabling async discard
[ 2001.143467] BTRFS info (device loop0): last unmount of filesystem 9341b58c-34fa-48f5-90b4-0374da935ab6
[ 2004.952842] loop0: detected capacity change from 0 to 10240
[ 2005.953686] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2005.970818] EXT4-fs (loop0): mounted filesystem 50caf1f4-a91b-441d-92e0-fe3b1b1a2256 r/w without journal. Quota mode: disabled.
[ 2006.224969] EXT4-fs (loop0): unmounting filesystem 50caf1f4-a91b-441d-92e0-fe3b1b1a2256.
[ 2007.023728] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2007.032852] EXT4-fs (loop0): mounted filesystem 50caf1f4-a91b-441d-92e0-fe3b1b1a2256 r/w without journal. Quota mode: disabled.
[ 2007.356365] EXT4-fs (loop0): unmounting filesystem 50caf1f4-a91b-441d-92e0-fe3b1b1a2256.
[ 2011.018619] loop0: detected capacity change from 0 to 10240
[ 2011.916468] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2011.927857] EXT4-fs (loop0): mounted filesystem d2eb8d6d-18e5-4995-9571-df005ccf6580 r/w without journal. Quota mode: disabled.
[ 2012.255020] EXT4-fs (loop0): unmounting filesystem d2eb8d6d-18e5-4995-9571-df005ccf6580.
[ 2015.605297] loop0: detected capacity change from 0 to 10240
[ 2016.614264] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2016.631720] EXT4-fs (loop0): mounted filesystem bf0d52e7-3b5e-40eb-89f5-8cddd227dd91 r/w without journal. Quota mode: disabled.
[ 2016.887938] EXT4-fs (loop0): unmounting filesystem bf0d52e7-3b5e-40eb-89f5-8cddd227dd91.
[ 2020.020200] loop0: detected capacity change from 0 to 10240
[ 2021.598428] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2021.695508] EXT4-fs (loop0): mounted filesystem ca137181-9433-4233-9d21-9ada40cffef2 r/w without journal. Quota mode: disabled.
[ 2022.255740] EXT4-fs (loop0): unmounting filesystem ca137181-9433-4233-9d21-9ada40cffef2.
[ 2023.850816] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2023.867217] EXT4-fs (loop0): mounted filesystem ca137181-9433-4233-9d21-9ada40cffef2 r/w without journal. Quota mode: disabled.
[ 2024.461520] EXT4-fs (loop0): unmounting filesystem ca137181-9433-4233-9d21-9ada40cffef2.
[ 2026.045735] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2026.071675] EXT4-fs (loop0): mounted filesystem ca137181-9433-4233-9d21-9ada40cffef2 r/w without journal. Quota mode: disabled.
[ 2026.553359] EXT4-fs (loop0): unmounting filesystem ca137181-9433-4233-9d21-9ada40cffef2.
[ 2030.468416] loop0: detected capacity change from 0 to 10240
[ 2031.877377] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2031.892713] EXT4-fs (loop0): mounted filesystem bd4763a1-6325-4c73-87e9-d8a93014f013 r/w without journal. Quota mode: disabled.
[ 2032.244786] EXT4-fs (loop0): unmounting filesystem bd4763a1-6325-4c73-87e9-d8a93014f013.
[ 2033.184218] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2033.197235] EXT4-fs (loop0): mounted filesystem bd4763a1-6325-4c73-87e9-d8a93014f013 r/w without journal. Quota mode: disabled.
[ 2033.560768] EXT4-fs (loop0): unmounting filesystem bd4763a1-6325-4c73-87e9-d8a93014f013.
[ 2038.361486] loop0: detected capacity change from 0 to 10240
[ 2040.148210] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2040.168466] EXT4-fs (loop0): mounted filesystem 69c54658-0c37-44aa-8d5d-bc24b955f9bb r/w without journal. Quota mode: disabled.
[ 2040.631083] EXT4-fs (loop0): unmounting filesystem 69c54658-0c37-44aa-8d5d-bc24b955f9bb.
[ 2041.727460] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2041.749769] EXT4-fs (loop0): mounted filesystem 69c54658-0c37-44aa-8d5d-bc24b955f9bb r/w without journal. Quota mode: disabled.
[ 2042.182207] EXT4-fs (loop0): unmounting filesystem 69c54658-0c37-44aa-8d5d-bc24b955f9bb.
[ 2046.947834] loop0: detected capacity change from 0 to 10240
[ 2046.962235] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2046.976966] EXT4-fs (loop0): mounted filesystem bb43d7c5-31eb-4107-b312-b58152e5a45d r/w without journal. Quota mode: disabled.
[ 2047.463643] EXT4-fs (loop0): unmounting filesystem bb43d7c5-31eb-4107-b312-b58152e5a45d.
[ 2055.753284] loop0: detected capacity change from 0 to 10240
[ 2056.963027] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2056.996829] EXT4-fs (loop0): mounted filesystem fdafbd06-2276-44e8-bd76-080530144d34 r/w without journal. Quota mode: disabled.
[ 2057.424789] EXT4-fs (loop0): unmounting filesystem fdafbd06-2276-44e8-bd76-080530144d34.
[ 2061.662878] loop0: detected capacity change from 0 to 10240
[ 2063.264198] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2063.278681] EXT4-fs (loop0): mounted filesystem e5aecfb3-26cf-4d72-bfb0-f0f656794966 r/w without journal. Quota mode: disabled.
[ 2063.667150] EXT4-fs (loop0): unmounting filesystem e5aecfb3-26cf-4d72-bfb0-f0f656794966.
[ 2064.579020] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2064.591351] EXT4-fs (loop0): mounted filesystem e5aecfb3-26cf-4d72-bfb0-f0f656794966 r/w without journal. Quota mode: disabled.
[ 2064.960926] EXT4-fs (loop0): unmounting filesystem e5aecfb3-26cf-4d72-bfb0-f0f656794966.
[ 2065.869160] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2065.886680] EXT4-fs (loop0): mounted filesystem e5aecfb3-26cf-4d72-bfb0-f0f656794966 r/w without journal. Quota mode: disabled.
[ 2066.282344] EXT4-fs (loop0): unmounting filesystem e5aecfb3-26cf-4d72-bfb0-f0f656794966.
[ 2070.781069] loop0: detected capacity change from 0 to 10240
[ 2072.586286] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2072.603195] EXT4-fs (loop0): mounted filesystem 19e043ab-6b74-4809-b4c0-a7d655744979 r/w without journal. Quota mode: disabled.
[ 2073.007342] EXT4-fs (loop0): unmounting filesystem 19e043ab-6b74-4809-b4c0-a7d655744979.
[ 2074.054779] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2074.067925] EXT4-fs (loop0): mounted filesystem 19e043ab-6b74-4809-b4c0-a7d655744979 r/w without journal. Quota mode: disabled.
[ 2074.422286] EXT4-fs (loop0): unmounting filesystem 19e043ab-6b74-4809-b4c0-a7d655744979.
[ 2078.482495] loop0: detected capacity change from 0 to 10240
[ 2079.944013] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2079.957868] EXT4-fs (loop0): mounted filesystem cfb7d45a-2560-4a54-b87f-9ef97e5b0766 r/w without journal. Quota mode: disabled.
[ 2080.311760] EXT4-fs (loop0): unmounting filesystem cfb7d45a-2560-4a54-b87f-9ef97e5b0766.
[ 2081.210424] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2081.223466] EXT4-fs (loop0): mounted filesystem cfb7d45a-2560-4a54-b87f-9ef97e5b0766 r/w without journal. Quota mode: disabled.
[ 2081.545453] EXT4-fs (loop0): unmounting filesystem cfb7d45a-2560-4a54-b87f-9ef97e5b0766.
[ 2085.052161] loop0: detected capacity change from 0 to 10240
[ 2086.046592] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2086.058957] EXT4-fs (loop0): mounted filesystem 8f34ad68-878d-40b6-93b5-f8d94d846cfb r/w without journal. Quota mode: disabled.
[ 2086.373235] EXT4-fs (loop0): unmounting filesystem 8f34ad68-878d-40b6-93b5-f8d94d846cfb.
[ 2087.274043] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2087.293431] EXT4-fs (loop0): mounted filesystem 8f34ad68-878d-40b6-93b5-f8d94d846cfb r/w without journal. Quota mode: disabled.
[ 2087.571932] EXT4-fs (loop0): unmounting filesystem 8f34ad68-878d-40b6-93b5-f8d94d846cfb.
[ 2098.059361] loop0: detected capacity change from 0 to 10240
[ 2098.120029] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2098.135735] EXT4-fs (loop0): mounted filesystem 4f968f6b-d282-4428-9896-de1fdb0a8afa r/w without journal. Quota mode: disabled.
[ 2098.628826] EXT4-fs (loop0): unmounting filesystem 4f968f6b-d282-4428-9896-de1fdb0a8afa.
[ 2102.135318] loop0: detected capacity change from 0 to 10240
[ 2102.551053] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2102.563898] EXT4-fs (loop0): mounted filesystem ffe93ac0-0e0e-467f-b246-94531a96d983 r/w without journal. Quota mode: disabled.
[ 2102.855690] EXT4-fs (loop0): re-mounted ffe93ac0-0e0e-467f-b246-94531a96d983 ro. Quota mode: disabled.
[ 2103.205268] EXT4-fs (loop0): unmounting filesystem ffe93ac0-0e0e-467f-b246-94531a96d983.
[ 2107.143669] loop0: detected capacity change from 0 to 10240
[ 2108.622991] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2108.699297] EXT4-fs (loop0): mounted filesystem 90ff7dfc-5618-493b-9737-63edade34e5a r/w without journal. Quota mode: disabled.
[ 2109.044285] EXT4-fs (loop0): unmounting filesystem 90ff7dfc-5618-493b-9737-63edade34e5a.
[ 2109.353570] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2109.394597] EXT4-fs (loop0): mounted filesystem 90ff7dfc-5618-493b-9737-63edade34e5a r/w without journal. Quota mode: disabled.
[ 2109.730742] EXT4-fs (loop0): unmounting filesystem 90ff7dfc-5618-493b-9737-63edade34e5a.
[ 2110.075334] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2110.117020] EXT4-fs (loop0): mounted filesystem 90ff7dfc-5618-493b-9737-63edade34e5a r/w without journal. Quota mode: disabled.
[ 2110.439904] EXT4-fs (loop0): unmounting filesystem 90ff7dfc-5618-493b-9737-63edade34e5a.
[ 2110.790303] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2110.823443] EXT4-fs (loop0): mounted filesystem 90ff7dfc-5618-493b-9737-63edade34e5a r/w without journal. Quota mode: disabled.
[ 2111.295654] EXT4-fs (loop0): unmounting filesystem 90ff7dfc-5618-493b-9737-63edade34e5a.
[ 2111.608167] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2111.663943] EXT4-fs (loop0): mounted filesystem 90ff7dfc-5618-493b-9737-63edade34e5a r/w without journal. Quota mode: disabled.
[ 2111.980212] EXT4-fs (loop0): unmounting filesystem 90ff7dfc-5618-493b-9737-63edade34e5a.
[ 2112.270401] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2112.285585] EXT4-fs (loop0): mounted filesystem 90ff7dfc-5618-493b-9737-63edade34e5a r/w without journal. Quota mode: disabled.
[ 2112.562058] EXT4-fs (loop0): unmounting filesystem 90ff7dfc-5618-493b-9737-63edade34e5a.
[ 2122.900425] loop0: detected capacity change from 0 to 10240
[ 2123.604925] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2123.640289] EXT4-fs (loop0): mounted filesystem 714ce9f1-6d40-4310-884a-3cd2c068d7bb r/w without journal. Quota mode: disabled.
[ 2123.925735] EXT4-fs (loop0): unmounting filesystem 714ce9f1-6d40-4310-884a-3cd2c068d7bb.
[ 2124.760453] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2124.765286] EXT4-fs (loop0): mounted filesystem 714ce9f1-6d40-4310-884a-3cd2c068d7bb ro without journal. Quota mode: disabled.
[ 2125.076444] EXT4-fs (loop0): unmounting filesystem 714ce9f1-6d40-4310-884a-3cd2c068d7bb.
[ 2139.486073] loop0: detected capacity change from 0 to 10240
[ 2140.319318] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2140.331650] EXT4-fs (loop0): mounted filesystem 3a74fbde-d8d6-41e6-8c32-101087d7cf1c r/w without journal. Quota mode: disabled.
[ 2140.869798] EXT4-fs (loop0): unmounting filesystem 3a74fbde-d8d6-41e6-8c32-101087d7cf1c.
[ 2141.827759] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2141.847640] EXT4-fs (loop0): mounted filesystem 3a74fbde-d8d6-41e6-8c32-101087d7cf1c r/w without journal. Quota mode: disabled.
[ 2142.195934] EXT4-fs (loop0): unmounting filesystem 3a74fbde-d8d6-41e6-8c32-101087d7cf1c.
[ 2147.562205] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[ 2147.564126] scsi host0: scsi_debug: version 0191 [20210520]
[ 2147.564126]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[ 2147.584080] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[ 2147.593742] scsi 0:0:0:0: Power-on or device reset occurred
[ 2147.629923] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[ 2147.638115] sd 0:0:0:0: [sda] Write Protect is off
[ 2147.648978] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 2147.667548] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 2147.669487] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 2147.733235] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2149.375707]  sda: sda1 sda2 sda3 sda4
[ 2151.891156] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 2151.912863] EXT4-fs (sda1): mounted filesystem 216c7b8e-3563-4dda-8f5e-0fa70de51193 r/w without journal. Quota mode: disabled.
[ 2153.007730] EXT4-fs (sda1): unmounting filesystem 216c7b8e-3563-4dda-8f5e-0fa70de51193.
[ 2154.420017] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 2154.447336] EXT4-fs (sda1): mounted filesystem 216c7b8e-3563-4dda-8f5e-0fa70de51193 r/w without journal. Quota mode: disabled.
[ 2155.426656] EXT4-fs (sda1): unmounting filesystem 216c7b8e-3563-4dda-8f5e-0fa70de51193.
[ 2156.688009] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 2156.708645] EXT4-fs (sda1): mounted filesystem 216c7b8e-3563-4dda-8f5e-0fa70de51193 r/w without journal. Quota mode: disabled.
[ 2157.712787] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 2157.734661] EXT4-fs (sda2): mounted filesystem bcd14c00-24c6-4158-ba29-2b1e0cc5c100 r/w without journal. Quota mode: disabled.
[ 2158.142881] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 2158.164057] EXT4-fs (sda3): mounted filesystem 476a0845-df2e-44fc-a9ce-d8d48eced5cd r/w without journal. Quota mode: disabled.
[ 2158.527145] EXT4-fs (sda4): mounting ext2 file system using the ext4 subsystem
[ 2158.549441] EXT4-fs (sda4): mounted filesystem f1a166ae-6428-4466-8daa-f5289df73db5 r/w without journal. Quota mode: disabled.
[ 2158.766685] EXT4-fs (sda4): unmounting filesystem f1a166ae-6428-4466-8daa-f5289df73db5.
[ 2158.832940] EXT4-fs (sda3): unmounting filesystem 476a0845-df2e-44fc-a9ce-d8d48eced5cd.
[ 2158.894070] EXT4-fs (sda2): unmounting filesystem bcd14c00-24c6-4158-ba29-2b1e0cc5c100.
[ 2158.970850] EXT4-fs (sda1): unmounting filesystem 216c7b8e-3563-4dda-8f5e-0fa70de51193.
[ 2160.244010] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2164.319299] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[ 2164.321092] scsi host0: scsi_debug: version 0191 [20210520]
[ 2164.321092]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[ 2164.325805] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[ 2164.330756] scsi 0:0:0:0: Power-on or device reset occurred
[ 2164.359872] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[ 2164.367335] sd 0:0:0:0: [sda] Write Protect is off
[ 2164.377588] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 2164.392840] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 2164.394020] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 2164.443109] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2166.020635]  sda: sda1 sda2 sda3 sda4
[ 2168.463169] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 2168.482193] EXT4-fs (sda1): mounted filesystem 3d8cd234-5fbd-4e8f-87c9-014f18ec7858 r/w without journal. Quota mode: disabled.
[ 2168.889347] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 2168.910501] EXT4-fs (sda2): mounted filesystem a4d66e41-e3b4-4656-b163-9908d56fd5b4 r/w without journal. Quota mode: disabled.
[ 2169.445485] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 2169.463409] EXT4-fs (sda3): mounted filesystem e70d776c-f8af-4a8a-8ab0-a21b4e4f125a r/w without journal. Quota mode: disabled.
[ 2169.732879] EXT4-fs (sda4): mounting ext2 file system using the ext4 subsystem
[ 2169.753504] EXT4-fs (sda4): mounted filesystem 62587b09-bb0e-4bb1-b93c-3747160718ad r/w without journal. Quota mode: disabled.
[ 2170.249932] EXT4-fs (sda4): unmounting filesystem 62587b09-bb0e-4bb1-b93c-3747160718ad.
[ 2170.311486] EXT4-fs (sda3): unmounting filesystem e70d776c-f8af-4a8a-8ab0-a21b4e4f125a.
[ 2170.382906] EXT4-fs (sda2): unmounting filesystem a4d66e41-e3b4-4656-b163-9908d56fd5b4.
[ 2170.446661] EXT4-fs (sda1): unmounting filesystem 3d8cd234-5fbd-4e8f-87c9-014f18ec7858.
[ 2170.977278] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2174.072057] loop0: detected capacity change from 0 to 10240
[ 2175.243931] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2175.255905] EXT4-fs (loop0): mounted filesystem d1b7cf71-110c-4209-99e0-fe0962741f19 r/w without journal. Quota mode: disabled.
[ 2175.575783] EXT4-fs (loop0): unmounting filesystem d1b7cf71-110c-4209-99e0-fe0962741f19.
[ 2176.578249] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[ 2176.590594] EXT4-fs (loop0): mounted filesystem d1b7cf71-110c-4209-99e0-fe0962741f19 r/w without journal. Quota mode: disabled.
[ 2176.945976] EXT4-fs (loop0): unmounting filesystem d1b7cf71-110c-4209-99e0-fe0962741f19.
[ 2184.241114] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[ 2184.242364] scsi host0: scsi_debug: version 0191 [20210520]
[ 2184.242364]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[ 2184.246528] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[ 2184.254112] scsi 0:0:0:0: Power-on or device reset occurred
[ 2184.279872] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[ 2184.286704] sd 0:0:0:0: [sda] Write Protect is off
[ 2184.296725] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 2184.311200] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 2184.312160] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 2184.359616] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2187.716837]  sda: sda1 sda2 sda3
[ 2197.210057] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2557.653935] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[ 2557.667649] scsi host0: scsi_debug: version 0191 [20210520]
[ 2557.667649]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[ 2557.705308] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[ 2557.714835] scsi 0:0:0:0: Power-on or device reset occurred
[ 2557.773884] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[ 2557.793314] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2557.809467] sd 0:0:0:0: [sda] Write Protect is off
[ 2557.821556] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 2557.843059] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 2557.847129] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 2557.957060] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2560.635916]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2563.531783]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2567.158436]  sda: sda1 sda2 sda3
[ 2571.125892]  sda: sda1
[ 2575.671902]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2582.285731]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 2585.245882]  sda: sda1
[ 2586.148710]  sda: sda1
[ 2589.510401]  sda: sda1 sda2 < >
[ 2590.436451]  sda: sda1 sda2 < >
[ 2593.572103]  sda: sda1 sda2 < >
[ 2594.549457]  sda: sda1 sda2 < >
[ 2598.336036]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2599.378332]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2603.171732]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2604.296869]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2607.767541]  sda: sda1
[ 2611.035625]  sda: sda1 sda3
[ 2614.253387]  sda: sda1 sda2
[ 2617.923334]  sda: sda1 sda2 sda3 sda4
[ 2621.108625]  sda: sda1 sda2 sda3
[ 2622.937457] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2627.673091] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[ 2627.675090] scsi host0: scsi_debug: version 0191 [20210520]
[ 2627.675090]   dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0
[ 2627.694053] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[ 2627.702626] scsi 0:0:0:0: Power-on or device reset occurred
[ 2627.738049] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB)
[ 2627.739566] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2627.746601] sd 0:0:0:0: [sda] Write Protect is off
[ 2627.757124] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 2627.771881] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 2627.773894] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 2627.831376] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2630.851448]  sda: sda1 sda2 sda3 sda4
[ 2635.647098]  sda: sda1 sda2 sda3 sda4
[ 2640.657139]  sda: sda1 sda2 sda3 sda4
[ 2643.690415] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2650.523456] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[ 2650.530270] scsi host0: scsi_debug: version 0191 [20210520]
[ 2650.530270]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[ 2650.542125] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[ 2650.554085] scsi 0:0:0:0: Power-on or device reset occurred
[ 2650.589846] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[ 2650.592200] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2650.602683] sd 0:0:0:0: [sda] Write Protect is off
[ 2650.614844] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 2650.633562] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 2650.643608] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 2650.701052] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2653.769107]  sda: sda1 sda2 sda3 sda4 sda5
[ 2656.299659]  sda: sda1 sda2 sda3 sda4 sda5
[ 2657.271484]  sda: sda1 sda2 sda3 sda4 sda5
[ 2658.260816]  sda: sda1 sda2 sda3 sda4 sda5
[ 2659.251786]  sda: sda1 sda2 sda3 sda4 sda5
[ 2660.343051]  sda: sda1 sda2 sda3 sda4 sda5
[ 2662.787628]  sda: sda1 sda2 sda3 sda4 sda5
[ 2665.169286]  sda: sda1 sda2 sda3 sda4 sda5
[ 2667.500033]  sda: sda1 sda2 sda3 sda4 sda5
[ 2670.180043]  sda: sda1 sda2 sda3 sda4 sda5
[ 2672.911485]  sda: sda1 sda2 sda3 sda4 sda5
[ 2675.489193]  sda: sda1 sda2 sda3 sda4 sda5
[ 2684.087599]  sda: sda1 sda2 sda3 sda4
[ 2691.302889]  sda: sda1
[ 2692.387997]  sda: sda1
[ 2695.858794]  sda: sda1 sda2 sda3 sda4
[ 2696.866537]  sda: sda1 sda2 sda3 sda4
[ 2698.536822] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2702.850616] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[ 2702.851725] scsi host0: scsi_debug: version 0191 [20210520]
[ 2702.851725]   dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0
[ 2702.866207] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[ 2702.872016] scsi 0:0:0:0: Power-on or device reset occurred
[ 2702.905351] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB)
[ 2702.911741] sd 0:0:0:0: [sda] Write Protect is off
[ 2702.922780] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 2702.938458] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 2702.939860] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 2702.989965] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2704.354935]  sda: sda1
[ 2706.563100]  sda: sda1
[ 2708.902547]  sda: sda1
[ 2711.413779]  sda: sda1
[ 2712.997072] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2716.282128] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[ 2716.283170] scsi host0: scsi_debug: version 0191 [20210520]
[ 2716.283170]   dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0
[ 2716.286872] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[ 2716.292655] scsi 0:0:0:0: Power-on or device reset occurred
[ 2716.323019] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB)
[ 2716.330710] sd 0:0:0:0: [sda] Write Protect is off
[ 2716.341154] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 2716.356323] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 2716.357946] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 2716.407086] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2718.393961]  sda: sda1
[ 2719.727538]  sda: sda1
[ 2721.902026]  sda: sda1
[ 2724.542004]  sda: sda1
[ 2727.016344]  sda: sda1
[ 2728.990740]  sda: sda1
[ 2730.901281]  sda: sda1
[ 2733.081331]  sda: sda1
[ 2735.647257]  sda: sda1
[ 2737.720881]  sda: sda1
[ 2739.882183]  sda: sda1
[ 2741.990470]  sda: sda1
[ 2743.771249]  sda: sda1
[ 2745.467381]  sda: sda1 sda2
[ 2746.582172]  sda: sda1 sda2 sda3
[ 2747.877323]  sda: sda1 sda2 sda3
[ 2750.038201]  sda: sda1 sda2 sda3
[ 2753.200283]  sda: sda1
[ 2754.700918]  sda: sda1
[ 2756.929740]  sda: sda1
[ 2758.990075]  sda: sda1
[ 2761.293444]  sda: sda1
[ 2763.872745]  sda: sda1
[ 2766.158281]  sda: sda1
[ 2768.327174]  sda: sda1
[ 2771.113182]  sda: sda1
[ 2773.241275]  sda: sda1
[ 2775.599455]  sda: sda1
[ 2778.125621]  sda: sda1
[ 2780.336737]  sda: sda1
[ 2782.655814]  sda: sda1 sda2
[ 2783.887551]  sda: sda1 sda2 sda3
[ 2785.171175]  sda: sda1 sda2 sda3
[ 2787.260228]  sda: sda1 sda2 sda3
[ 2790.899407]  sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[ 2791.989667]  sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[ 2794.633278] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2799.821305] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[ 2799.823296] scsi host0: scsi_debug: version 0191 [20210520]
[ 2799.823296]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[ 2799.844134] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[ 2799.854616] scsi 0:0:0:0: Power-on or device reset occurred
[ 2799.888834] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[ 2799.890570] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2799.897905] sd 0:0:0:0: [sda] Write Protect is off
[ 2799.908769] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 2799.924019] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 2799.925842] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 2799.984264] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2802.800014]  sda: sda1 sda2 sda3 sda4
[ 2806.739849]  sda: sda1 sda2 sda3 sda4
[ 2810.356795]  sda: sda1 sda2 sda3 sda4
[ 2821.730180] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2825.297294] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[ 2825.298915] scsi host0: scsi_debug: version 0191 [20210520]
[ 2825.298915]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[ 2825.304957] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[ 2825.311486] scsi 0:0:0:0: Power-on or device reset occurred
[ 2825.337327] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[ 2825.338330] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2825.344523] sd 0:0:0:0: [sda] Write Protect is off
[ 2825.353952] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 2825.367858] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 2825.369215] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 2825.414678] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2838.378864]  sda: sda1
[ 2841.325116]  sda: sda1
[ 2844.105546] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2852.001538] loop0: detected capacity change from 0 to 10240
[ 2852.536434] Adding 5116k swap on /dev/loop0.  Priority:-2 extents:1 across:5116k 
[ 2857.097574] loop0: detected capacity change from 0 to 10240
[ 2857.661435] Adding 5116k swap on /dev/loop0.  Priority:-2 extents:1 across:5116k 
[ 2862.034795] loop0: detected capacity change from 0 to 10240
[ 2863.466845] Adding 5116k swap on /dev/loop0.  Priority:-2 extents:1 across:5116k 
[ 2867.007379] loop0: detected capacity change from 0 to 10240
[ 2867.882718] Adding 5116k swap on /dev/loop0.  Priority:-2 extents:1 across:5116k 
[ 2871.015847] loop0: detected capacity change from 0 to 10240
[ 2871.626272] Adding 5116k swap on /dev/loop0.  Priority:-2 extents:1 across:5116k 
[ 2932.694630] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[ 2932.704248] scsi host0: scsi_debug: version 0191 [20210520]
[ 2932.704248]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[ 2932.735084] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[ 2932.745842] scsi 0:0:0:0: Power-on or device reset occurred
[ 2932.785152] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[ 2932.793744] sd 0:0:0:0: [sda] Write Protect is off
[ 2932.805027] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 2932.820605] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 2932.822196] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 2932.885400]  sda: sda1 sda2
[ 2932.894123] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2936.004138] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2938.418079] udevd[32334]: starting version 3.2.14
[ 2938.577746] udevd[32335]: starting eudev-3.2.14
