[    0.000000] Linux version 5.15.150-yocto-standard (oe-user@oe-host) (i686-poky-linux-musl-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Mar 11 14:54:28 UTC 2024
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000000ffd8000-0x000000000fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr d3a7001, primary cpu clock
[    0.000002] kvm-clock: using sched offset of 481164211 cycles
[    0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000009] tsc: Detected 2599.996 MHz processor
[    0.000903] last_pfn = 0xffd8 max_arch_pfn = 0x100000
[    0.000960] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.004307] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.004350] ACPI: Early table checksum verification disabled
[    0.004353] ACPI: RSDP 0x00000000000F5990 000014 (v00 BOCHS )
[    0.004362] ACPI: RSDT 0x000000000FFE246E 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004368] ACPI: FACP 0x000000000FFE224E 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004376] ACPI: DSDT 0x000000000FFE0040 00220E (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004380] ACPI: FACS 0x000000000FFE0000 000040
[    0.004384] ACPI: APIC 0x000000000FFE2342 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004388] ACPI: HPET 0x000000000FFE23D2 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004392] ACPI: MCFG 0x000000000FFE240A 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004396] ACPI: WAET 0x000000000FFE2446 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004399] ACPI: Reserving FACP table memory at [mem 0xffe224e-0xffe2341]
[    0.004401] ACPI: Reserving DSDT table memory at [mem 0xffe0040-0xffe224d]
[    0.004402] ACPI: Reserving FACS table memory at [mem 0xffe0000-0xffe003f]
[    0.004403] ACPI: Reserving APIC table memory at [mem 0xffe2342-0xffe23d1]
[    0.004405] ACPI: Reserving HPET table memory at [mem 0xffe23d2-0xffe2409]
[    0.004406] ACPI: Reserving MCFG table memory at [mem 0xffe240a-0xffe2445]
[    0.004407] ACPI: Reserving WAET table memory at [mem 0xffe2446-0xffe246d]
[    0.004416] 0MB HIGHMEM available.
[    0.004418] 255MB LOWMEM available.
[    0.004419]   mapped low ram: 0 - 0ffd8000
[    0.004420]   low ram: 0 - 0ffd8000
[    0.004422] Zone ranges:
[    0.004423]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.004425]   Normal   [mem 0x0000000001000000-0x000000000ffd7fff]
[    0.004427]   HighMem  empty
[    0.004429] Movable zone start for each node
[    0.004430] Early memory node ranges
[    0.004430]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.004432]   node   0: [mem 0x0000000000100000-0x000000000ffd7fff]
[    0.004434] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffd7fff]
[    0.004832] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.004881] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.006350] Using APIC driver default
[    0.008943] ACPI: PM-Timer IO Port: 0x608
[    0.008949] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.008954] Intel MultiProcessor Specification v1.4
[    0.008955]     Virtual Wire compatibility mode.
[    0.008958] MPTABLE: OEM ID: BOCHSCPU
[    0.008959] MPTABLE: Product ID: 0.1         
[    0.008960] MPTABLE: APIC at: 0xFEE00000
[    0.008970] Processor #0 (Bootup-CPU)
[    0.009004] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.009008] Processors: 1
[    0.009009] TSC deadline timer available
[    0.009012] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.009035] [mem 0x10000000-0xafffffff] available for PCI devices
[    0.009036] Booting paravirtualized kernel on KVM
[    0.009038] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.009043] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.009066] percpu: Embedded 32 pages/cpu s102156 r0 d28916 u131072
[    0.009086] kvm-guest: stealtime: cpu 0, msr fd43a40
[    0.009089] Built 1 zonelists, mobility grouping on.  Total pages: 64758
[    0.009091] Kernel command line: root=/dev/vda rw  clocksource=kvm-clock hpet=disable noapic nolapic ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.009314] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.009320] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.009858] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.009861] Initializing HighMem for node 0 (00000000:00000000)
[    0.010169] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.010176] Memory: 237240K/261592K available (12243K kernel code, 1551K rwdata, 3160K rodata, 876K init, 548K bss, 24352K reserved, 0K cma-reserved, 0K highmem)
[    0.010598] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.010614] ftrace: allocating 44167 entries in 87 pages
[    0.030370] ftrace: allocated 87 pages with 5 groups
[    0.030421] trace event string verifier disabled
[    0.030853] rcu: Preemptible hierarchical RCU implementation.
[    0.030854] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.030856] 	All grace periods are expedited (rcu_expedited).
[    0.030857] 	Trampoline variant of Tasks RCU enabled.
[    0.030857] 	Rude variant of Tasks RCU enabled.
[    0.030858] 	Tracing variant of Tasks RCU enabled.
[    0.030859] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.030860] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.037267] NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16
[    0.037557] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[    0.037569] random: crng init done
[    0.044247] Console: colour VGA+ 80x25
[    0.156634] printk: console [ttyS0] enabled
[    0.157420] ACPI: Core revision 20210730
[    0.158224] ACPI: setting ELCR to 0200 (from 0c00)
[    0.159150] APIC disabled via kernel command line
[    0.160065] APIC: Keep in PIC mode(8259)
[    0.160821] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.163859] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.166039] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.166862] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.167863] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.169863] Spectre V2 : Mitigation: Retpolines
[    0.170862] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.171862] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.172862] Speculative Store Bypass: Vulnerable
[    0.174862] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
[    0.175862] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.176862] MMIO Stale Data: Unknown: No mitigations
[    0.177862] SRBDS: Unknown: Dependent on hypervisor status
[    0.178885] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.179862] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.180862] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.181864] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.182862] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.190689] Freeing SMP alternatives memory: 48K
[    0.190863] pid_max: default: 32768 minimum: 301
[    0.191899] LSM: Security Framework initializing
[    0.192882] landlock: Up and running.
[    0.193886] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.194863] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.197186] smpboot: SMP disabled
[    0.198043] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.198896] signal: max sigframe size: 1760
[    0.199895] rcu: Hierarchical SRCU implementation.
[    0.201081] smp: Bringing up secondary CPUs ...
[    0.201864] smp: Brought up 1 node, 1 CPU
[    0.202863] smpboot: Max logical packages: 1
[    0.203862] smpboot: Total of 1 processors activated (5199.99 BogoMIPS)
[    0.204966] devtmpfs: initialized
[    0.206989] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.207866] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.208899] pinctrl core: initialized pinctrl subsystem
[    0.210018] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.211872] thermal_sys: Registered thermal governor 'step_wise'
[    0.211874] thermal_sys: Registered thermal governor 'user_space'
[    0.212905] cpuidle: using governor menu
[    0.215069] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[    0.216881] ACPI: bus type PCI registered
[    0.217978] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.219861] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.220863] PCI: Using MMCONFIG for extended config space
[    0.221863] PCI: Using configuration type 1 for base access
[    0.226129] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.245873] raid6: sse2x2   gen()  8393 MB/s
[    0.262903] raid6: sse2x2   xor()  7119 MB/s
[    0.279871] raid6: sse2x1   gen() 10968 MB/s
[    0.296862] raid6: sse2x1   xor()  6279 MB/s
[    0.313874] raid6: sse1x2   gen()  6437 MB/s
[    0.330863] raid6: sse1x1   gen()  5734 MB/s
[    0.331604] raid6: using algorithm sse2x1 gen() 10968 MB/s
[    0.331862] raid6: .... xor() 6279 MB/s, rmw enabled
[    0.332862] raid6: using ssse3x1 recovery algorithm
[    0.333931] ACPI: Added _OSI(Module Device)
[    0.334863] ACPI: Added _OSI(Processor Device)
[    0.335570] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.335862] ACPI: Added _OSI(Processor Aggregator Device)
[    0.336862] ACPI: Added _OSI(Linux-Dell-Video)
[    0.337862] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.338863] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.341537] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.343901] ACPI: Interpreter enabled
[    0.344542] ACPI: PM: (supports S0 S3 S5)
[    0.344863] ACPI: Using PIC for interrupt routing
[    0.345887] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.346955] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.350333] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.350868] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.352898] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.353916] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.354873] acpi resource window ([0x100000000-0x8ffffffff] ignored, not CPU addressable)
[    0.355907] PCI host bridge to bus 0000:00
[    0.356863] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.357862] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.358863] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.359862] pci_bus 0000:00: root bus resource [mem 0x10000000-0xafffffff window]
[    0.360862] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.362862] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.363946] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.365515] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.367863] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.371864] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.377863] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.380863] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.382516] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.385202] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.388863] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.392035] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.395887] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.400884] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.403880] pci 0000:00:03.0: reg 0x20: [mem 0xfebd1000-0xfebd1fff]
[    0.408882] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.409965] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.412112] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.413867] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.417864] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[    0.426867] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.432498] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.437062] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.439478] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.443079] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.445492] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.448863] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.451006] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.452340] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd3000-0xfebd3fff]
[    0.456076] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.458383] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.460127] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.465233] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.467864] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd4000-0xfebd4fff]
[    0.470299] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.473646] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.476064] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.477962] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.478944] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.479933] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.480959] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.482916] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.483934] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.484936] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.485897] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.487878] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.488871] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.489872] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.490872] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.491870] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.492869] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.493872] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.495038] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored.
[    0.495862] ACPI: Unable to map lapic to logical cpu number
[    0.496932] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 2/0x2 ignored.
[    0.498882] ACPI: Unable to map lapic to logical cpu number
[    0.499941] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 3/0x3 ignored.
[    0.500869] ACPI: Unable to map lapic to logical cpu number
[    0.502131] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.502858] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.503875] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.504868] vgaarb: loaded
[    0.506000] SCSI subsystem initialized
[    0.506753] ACPI: bus type USB registered
[    0.506888] usbcore: registered new interface driver usbfs
[    0.507879] usbcore: registered new interface driver hub
[    0.508869] usbcore: registered new device driver usb
[    0.509883] pps_core: LinuxPPS API ver. 1 registered
[    0.510861] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.511867] PTP clock support registered
[    0.513206] Bluetooth: Core ver 2.22
[    0.513871] NET: Registered PF_BLUETOOTH protocol family
[    0.514862] Bluetooth: HCI device and connection manager initialized
[    0.515870] Bluetooth: HCI socket layer initialized
[    0.517871] Bluetooth: L2CAP socket layer initialized
[    0.518881] Bluetooth: SCO socket layer initialized
[    0.519957] PCI: Using ACPI for IRQ routing
[    0.606247] clocksource: Switched to clocksource kvm-clock
[    0.620562] pnp: PnP ACPI init
[    0.621343] system 00:07: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.622756] pnp: PnP ACPI: found 8 devices
[    0.667896] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.699539] NET: Registered PF_INET protocol family
[    0.700435] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.705572] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.706980] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.711421] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.714009] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.718425] TCP: Hash tables configured (established 2048 bind 2048)
[    0.719594] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.720704] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.725486] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.729490] RPC: Registered named UNIX socket transport module.
[    0.730491] RPC: Registered udp transport module.
[    0.731250] RPC: Registered tcp transport module.
[    0.731995] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.733061] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.737426] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.738504] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.739626] pci_bus 0000:00: resource 7 [mem 0x10000000-0xafffffff window]
[    0.743419] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.745934] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[    0.751751] ACPI: \_SB_.LNKB: Enabled at IRQ 10
[    0.753370] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[    0.758254] ACPI: \_SB_.LNKD: Enabled at IRQ 11
[    0.759684] PCI: CLS 0 bytes, default 64
[    0.762617] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.764029] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.785709] Initialise system trusted keyrings
[    0.786553] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    0.789078] NFS: Registering the id_resolver key type
[    0.789931] Key type id_resolver registered
[    0.790644] Key type id_legacy registered
[    0.791456] Key type cifs.idmap registered
[    0.809135] xor: automatically using best checksumming function   avx       
[    0.810159] Key type asymmetric registered
[    0.810731] Asymmetric key parser 'x509' registered
[    0.811434] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.812508] io scheduler mq-deadline registered
[    0.813138] io scheduler kyber registered
[    0.813853] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.821428] ACPI: button: Power Button [PWRF]
[    0.822466] ACPI: \_SB_.LNKF: Enabled at IRQ 10
[    0.824332] ACPI: \_SB_.LNKG: Enabled at IRQ 11
[    0.826086] ACPI: \_SB_.LNKH: Enabled at IRQ 11
[    0.827927] ACPI: \_SB_.LNKE: Enabled at IRQ 10
[    0.829744] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.830832] 00:03: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.832050] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.833241] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.834492] hpet_acpi_add: no address or irqs in _CRS
[    0.835558] Linux agpgart interface v0.103
[    0.837260] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.838033] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.840984] Console: switching to colour dummy device 80x25
[    0.841960] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.843225] [drm] number of scanouts: 1
[    0.843788] [drm] number of cap sets: 0
[    0.844635] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.847741] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.875138] Console: switching to colour frame buffer device 128x48
[    0.884735] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.887517] brd: module loaded
[    0.889072] loop: module loaded
[    0.890321] virtio_blk virtio3: [vda] 261560 512-byte logical blocks (134 MB/128 MiB)
[    0.893636] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.895102] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.897351] scsi host0: ahci
[    0.898017] scsi host1: ahci
[    0.898684] scsi host2: ahci
[    0.899304] scsi host3: ahci
[    0.899910] scsi host4: ahci
[    0.900552] scsi host5: ahci
[    0.901151] ata1: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4100 irq 10
[    0.902433] ata2: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4180 irq 10
[    0.903753] ata3: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4200 irq 10
[    0.905043] ata4: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4280 irq 10
[    0.906288] ata5: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4300 irq 10
[    0.907510] ata6: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4380 irq 10
[    0.910461] e100: Intel(R) PRO/100 Network Driver
[    0.911255] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.912241] e1000: Intel(R) PRO/1000 Network Driver
[    0.913028] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.914175] e1000e: Intel(R) PRO/1000 Network Driver
[    0.915003] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.916170] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.917048] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.917996] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.918954] ehci-pci: EHCI PCI platform driver
[    0.920062] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.920819] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.921982] ehci-pci 0000:00:1d.7: irq 11, io mem 0xfebd3000
[    0.935467] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.936458] hub 1-0:1.0: USB hub found
[    0.937007] hub 1-0:1.0: 6 ports detected
[    0.937740] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.938620] ohci-pci: OHCI PCI platform driver
[    0.939244] uhci_hcd: USB Universal Host Controller Interface driver
[    0.940536] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.941286] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.942385] uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000c100
[    0.943295] hub 2-0:1.0: USB hub found
[    0.943842] hub 2-0:1.0: 2 ports detected
[    0.944902] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.945697] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.946795] uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000c120
[    0.947873] hub 3-0:1.0: USB hub found
[    0.948464] hub 3-0:1.0: 2 ports detected
[    0.949564] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.950343] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.951558] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000c140
[    0.952668] hub 4-0:1.0: USB hub found
[    0.953198] hub 4-0:1.0: 2 ports detected
[    0.953910] usbcore: registered new interface driver usb-storage
[    0.954809] usbcore: registered new interface driver usbserial_generic
[    0.955749] usbserial: USB Serial support registered for generic
[    0.956677] usbcore: registered new interface driver ftdi_sio
[    0.957528] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.958662] usbcore: registered new interface driver pl2303
[    0.959460] usbserial: USB Serial support registered for pl2303
[    0.960320] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.961977] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.962720] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.963482] mousedev: PS/2 mouse device common for all mice
[    0.964573] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    0.967806] rtc_cmos 00:06: RTC can wake from S4
[    0.968825] rtc_cmos 00:06: registered as rtc0
[    0.969559] rtc_cmos 00:06: setting system clock to 2024-04-02T20:02:27 UTC (1712088147)
[    0.970744] rtc_cmos 00:06: alarms up to one day, y3k, 242 bytes nvram
[    0.971928] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.972827] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.973638] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.975190] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    0.976666] intel_pstate: CPU model not supported
[    0.977498] sdhci: Secure Digital Host Controller Interface driver
[    0.978528] sdhci: Copyright(c) Pierre Ossman
[    0.979282] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.980324] usbcore: registered new interface driver usbhid
[    0.981244] usbhid: USB HID core driver
[    0.981912] u32 classifier
[    0.982367]     input device check on
[    0.982960]     Actions configured
[    0.983701] NET: Registered PF_INET6 protocol family
[    0.984882] Segment Routing with IPv6
[    0.985542] In-situ OAM (IOAM) with IPv6
[    0.986219] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.987341] NET: Registered PF_PACKET protocol family
[    0.988231] Bridge firewalling registered
[    0.988935] Key type dns_resolver registered
[    0.989684] NET: Registered PF_VSOCK protocol family
[    0.990815] IPI shorthand broadcast: enabled
[    0.991578] sched_clock: Marking stable (868154106, 123393878)->(1005048363, -13500379)
[    0.992918] Loading compiled-in X.509 certificates
[    0.993778] Key type .fscrypt registered
[    0.994450] Key type fscrypt-provisioning registered
[    0.995680] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.997025] Key type encrypted registered
[    0.997782] printk: console [netcon0] enabled
[    0.998530] netconsole: network logging started
[    1.179457] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.216450] ata1: SATA link down (SStatus 0 SControl 300)
[    1.218746] ata2: SATA link down (SStatus 0 SControl 300)
[    1.226697] ata5: SATA link down (SStatus 0 SControl 300)
[    1.228902] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.231710] ata4: SATA link down (SStatus 0 SControl 300)
[    1.233945] ata6: SATA link down (SStatus 0 SControl 300)
[    1.236046] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.238082] ata3.00: applying bridge limits
[    1.239922] ata3.00: configured for UDMA/100
[    1.252294] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.270039] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.272447] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.313657] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4
[    1.317675] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.587780] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    1.603477] IP-Config: Complete:
[    1.604244]      device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5
[    1.607642]      host=192.168.7.6, domain=, nis-domain=(none)
[    1.609617]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.609621]      nameserver0=8.8.8.8
[    1.614239] md: Waiting for all devices to be available before autodetect
[    1.616622] md: If you don't use raid, use raid=noautodetect
[    1.618639] md: Autodetecting RAID arrays.
[    1.620171] md: autorun ...
[    1.621177] md: ... autorun DONE.
[    1.626542] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    1.629995] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.632965] devtmpfs: mounted
[    1.635687] Freeing unused kernel image (initmem) memory: 876K
[    1.637868] Write protecting kernel text and read-only data: 15404k
[    1.640070] Run /sbin/init as init process
INIT: version 3.01 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.783642] udevd[146]: starting version 3.2.10
[    1.797707] udevd[147]: starting eudev-3.2.10
[    1.973755] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled.
INIT: Entering runlevel: 5
Configuring network interfaces... RTNETLINK answers: File exists
Starting OpenBSD Secure Shell server: sshd
  generating ssh RSA host key...
  generating ssh ECDSA host key...
  generating ssh ED25519 host key...
done.
Starting rpcbind daemon...done.
starting statd: done
Starting atd: OK
[    9.330714] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
starting 8 nfsd kernel threads: [   10.393803] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   10.397418] NFSD: Using legacy client tracking operations.
[   10.399342] NFSD: starting 90-second grace period (net f0000000)
done
starting mountd: done
Starting system log daemon...0
Starting crond: OK

Poky (Yocto Project Reference Distro) 4.0.17 qemux86 ttyS0

qemux86 login: 