[ 0.000000] Linux version 6.6.23-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT_DYNAMIC Thu Mar 28 16:04:47 UTC 2024 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000001] kvm-clock: using sched offset of 651589754 cycles [ 0.000007] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000018] tsc: Detected 2299.998 MHz processor [ 0.001742] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.001783] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.001787] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.012533] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.012792] ACPI: Early table checksum verification disabled [ 0.012814] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS ) [ 0.012828] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.012854] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.012866] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.012873] ACPI: FACS 0x000000001FFE0000 000040 [ 0.012880] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.012887] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.012893] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.012899] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.012904] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a] [ 0.012907] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216] [ 0.012908] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.012910] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a] [ 0.012912] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2] [ 0.012913] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e] [ 0.012915] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436] [ 0.013038] Zone ranges: [ 0.013041] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.013044] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.013048] Normal empty [ 0.013049] Movable zone start for each node [ 0.013050] Early memory node ranges [ 0.013051] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.013054] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.013056] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.013647] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.013680] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.016262] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.017060] ACPI: PM-Timer IO Port: 0x608 [ 0.017084] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.017174] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.017180] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.017183] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.017185] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.017190] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.017193] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.017199] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.017201] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.017229] TSC deadline timer available [ 0.017230] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.017268] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.017326] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.017328] Booting paravirtualized kernel on KVM [ 0.017331] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.017357] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.018261] percpu: Embedded 56 pages/cpu s190568 r8192 d30616 u524288 [ 0.018319] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.018485] random: crng init done [ 0.018678] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.018767] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.018952] Built 1 zonelists, mobility grouping on. Total pages: 128728 [ 0.019878] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.022788] Memory: 477740K/523736K available (18432K kernel code, 2313K rwdata, 5228K rodata, 3384K init, 2320K bss, 45736K reserved, 0K cma-reserved) [ 0.022883] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.022905] Kernel/User page tables isolation: enabled [ 0.022986] ftrace: allocating 50969 entries in 200 pages [ 0.038475] ftrace: allocated 200 pages with 3 groups [ 0.038609] Dynamic Preempt: full [ 0.039177] workqueue: name exceeds WQ_NAME_LEN. Truncating to: events_freezable_power_efficien [ 0.039183] rcu: Preemptible hierarchical RCU implementation. [ 0.039184] rcu: RCU event tracing is enabled. [ 0.039185] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.039187] All grace periods are expedited (rcu_expedited). [ 0.039188] Trampoline variant of Tasks RCU enabled. [ 0.039189] Rude variant of Tasks RCU enabled. [ 0.039189] Tracing variant of Tasks RCU enabled. [ 0.039190] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.039192] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.043889] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.044123] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.044276] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.051021] Console: colour VGA+ 80x25 [ 0.051082] printk: console [ttyS0] enabled [ 0.339673] ACPI: Core revision 20230628 [ 0.341295] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.346406] APIC: Switch to symmetric I/O mode setup [ 0.348597] x2apic enabled [ 0.350114] APIC: Switched APIC routing to: physical x2apic [ 0.353893] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.356135] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212733415c7, max_idle_ns: 440795236380 ns [ 0.360173] Calibrating delay loop (skipped) preset value.. 4599.99 BogoMIPS (lpj=2299998) [ 0.362204] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.363178] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.364194] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.365179] Spectre V2 : Mitigation: Retpolines [ 0.366176] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.367182] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.368180] Speculative Store Bypass: Vulnerable [ 0.369180] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.371178] MMIO Stale Data: Unknown: No mitigations [ 0.372178] SRBDS: Unknown: Dependent on hypervisor status [ 0.373202] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.374179] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.375178] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.376180] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.377178] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.413222] Freeing SMP alternatives memory: 52K [ 0.414184] pid_max: default: 32768 minimum: 301 [ 0.415227] LSM: initializing lsm=capability,landlock,integrity [ 0.416200] landlock: Up and running. [ 0.417243] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.418185] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.420781] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.421548] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.422245] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.423251] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.424286] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.425279] signal: max sigframe size: 1776 [ 0.426280] rcu: Hierarchical SRCU implementation. [ 0.427191] rcu: Max phase no-delay instances is 400. [ 0.428638] smp: Bringing up secondary CPUs ... [ 0.429401] smpboot: x86: Booting SMP configuration: [ 0.430186] .... node #0, CPUs: #1 #2 #3 [ 0.431209] smp: Brought up 1 node, 4 CPUs [ 0.433196] smpboot: Max logical packages: 1 [ 0.434181] smpboot: Total of 4 processors activated (18399.98 BogoMIPS) [ 0.435669] devtmpfs: initialized [ 0.436502] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.437227] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.438868] pinctrl core: initialized pinctrl subsystem [ 0.440803] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.441491] thermal_sys: Registered thermal governor 'step_wise' [ 0.441495] thermal_sys: Registered thermal governor 'user_space' [ 0.442242] cpuidle: using governor menu [ 0.444589] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.445187] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.446208] PCI: Using configuration type 1 for base access [ 0.447539] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.465179] raid6: sse2x4 gen() 6565 MB/s [ 0.483181] raid6: sse2x2 gen() 6039 MB/s [ 0.501183] raid6: sse2x1 gen() 4419 MB/s [ 0.502186] raid6: using algorithm sse2x4 gen() 6565 MB/s [ 0.520180] raid6: .... xor() 3780 MB/s, rmw enabled [ 0.521183] raid6: using ssse3x2 recovery algorithm [ 0.522350] ACPI: Added _OSI(Module Device) [ 0.523181] ACPI: Added _OSI(Processor Device) [ 0.524184] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.525181] ACPI: Added _OSI(Processor Aggregator Device) [ 0.527951] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.531250] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.532429] ACPI: Interpreter enabled [ 0.533226] ACPI: PM: (supports S0 S3 S5) [ 0.534196] ACPI: Using IOAPIC for interrupt routing [ 0.535248] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.536181] PCI: Using E820 reservations for host bridge windows [ 0.537373] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.544607] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.545216] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.546318] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.547310] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.548390] PCI host bridge to bus 0000:00 [ 0.549186] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.550193] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.551188] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.552195] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.553187] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.554188] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.555193] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.556422] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.558379] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.561183] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.564182] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.571189] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.574187] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.577182] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.580152] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.582185] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.587183] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.590437] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.592899] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.596099] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.598001] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.601216] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.602382] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.604213] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.606955] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.608180] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.612181] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.617100] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.619398] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.621323] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.625168] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.627300] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.630177] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.632489] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.633720] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.637446] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.638711] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.639528] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.643572] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.644951] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.647662] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.650178] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.652651] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.653265] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.654260] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.655302] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.656258] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.657259] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.658256] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.659255] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.660214] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.661186] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.662185] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.663187] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.664187] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.665187] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.666187] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.667186] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.669284] iommu: Default domain type: Translated [ 0.670176] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.671325] SCSI subsystem initialized [ 0.672271] ACPI: bus type USB registered [ 0.673205] usbcore: registered new interface driver usbfs [ 0.674189] usbcore: registered new interface driver hub [ 0.675187] usbcore: registered new device driver usb [ 0.676203] pps_core: LinuxPPS API ver. 1 registered [ 0.677176] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.678194] PTP clock support registered [ 0.679622] Bluetooth: Core ver 2.22 [ 0.680193] NET: Registered PF_BLUETOOTH protocol family [ 0.681176] Bluetooth: HCI device and connection manager initialized [ 0.682187] Bluetooth: HCI socket layer initialized [ 0.683177] Bluetooth: L2CAP socket layer initialized [ 0.684189] Bluetooth: SCO socket layer initialized [ 0.685283] PCI: Using ACPI for IRQ routing [ 0.765269] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.766172] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.766172] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.766185] vgaarb: loaded [ 0.766851] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.767176] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.771357] clocksource: Switched to clocksource kvm-clock [ 0.775309] pnp: PnP ACPI init [ 0.776887] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.780031] pnp: PnP ACPI: found 5 devices [ 0.791404] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.794937] NET: Registered PF_INET protocol family [ 0.796837] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.799805] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.802841] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.805614] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.808320] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.810942] TCP: Hash tables configured (established 4096 bind 4096) [ 0.813400] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.816063] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.819866] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.822335] RPC: Registered named UNIX socket transport module. [ 0.824480] RPC: Registered udp transport module. [ 0.826130] RPC: Registered tcp transport module. [ 0.827793] RPC: Registered tcp-with-tls transport module. [ 0.829875] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.832244] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.834507] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.836417] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.837878] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.839348] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.840840] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.842710] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.844755] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.846640] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.848517] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.851984] PCI: CLS 0 bytes, default 64 [ 0.853152] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.854998] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x212733415c7, max_idle_ns: 440795236380 ns [ 0.858238] Initialise system trusted keyrings [ 0.859398] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.861575] NFS: Registering the id_resolver key type [ 0.862709] Key type id_resolver registered [ 0.863623] Key type id_legacy registered [ 0.864994] Key type cifs.idmap registered [ 0.881063] xor: automatically using best checksumming function avx [ 0.883936] Key type asymmetric registered [ 0.885301] Asymmetric key parser 'x509' registered [ 0.887078] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.889516] io scheduler mq-deadline registered [ 0.891192] io scheduler kyber registered [ 0.892684] io scheduler bfq registered [ 0.894602] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.901173] ACPI: button: Power Button [PWRF] [ 0.904022] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.907981] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.913089] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.920576] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.924152] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.926228] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.928407] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.932975] Linux agpgart interface v0.103 [ 0.934103] ACPI: bus type drm_connector registered [ 0.935414] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.936788] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.941324] Console: switching to colour dummy device 80x25 [ 0.948047] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.948051] [drm] features: -context_init [ 0.951186] [drm] number of scanouts: 1 [ 0.952096] [drm] number of cap sets: 0 [ 0.953673] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 0.958747] fbcon: virtio_gpudrmfb (fb0) is primary device [ 0.985564] Console: switching to colour frame buffer device 160x50 [ 1.019980] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.025591] brd: module loaded [ 1.027830] loop: module loaded [ 1.028957] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.033284] virtio_blk virtio3: [vda] 806378 512-byte logical blocks (413 MB/394 MiB) [ 1.040733] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 1.043525] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.048207] scsi host0: ahci [ 1.049573] scsi host1: ahci [ 1.050800] scsi host2: ahci [ 1.052094] scsi host3: ahci [ 1.053315] scsi host4: ahci [ 1.054563] scsi host5: ahci [ 1.055624] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 1.058221] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 1.060798] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 1.063344] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 1.065746] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 1.067407] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 1.070832] e100: Intel(R) PRO/100 Network Driver [ 1.071963] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.073173] e1000: Intel(R) PRO/1000 Network Driver [ 1.074229] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.075527] e1000e: Intel(R) PRO/1000 Network Driver [ 1.076632] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.078029] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.079204] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.081387] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.083990] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.087092] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.090103] hub 1-0:1.0: USB hub found [ 1.091772] hub 1-0:1.0: 2 ports detected [ 1.094038] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.096109] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.098020] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.106097] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.107964] hub 2-0:1.0: USB hub found [ 1.109183] hub 2-0:1.0: 6 ports detected [ 1.132215] hub 1-0:1.0: USB hub found [ 1.133714] hub 1-0:1.0: 2 ports detected [ 1.135380] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.137525] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.140540] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.143388] hub 3-0:1.0: USB hub found [ 1.144928] hub 3-0:1.0: 2 ports detected [ 1.148198] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.150342] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.153856] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.156799] hub 4-0:1.0: USB hub found [ 1.158452] hub 4-0:1.0: 2 ports detected [ 1.160660] usbcore: registered new interface driver usb-storage [ 1.162957] usbcore: registered new interface driver usbserial_generic [ 1.165421] usbserial: USB Serial support registered for generic [ 1.167936] usbcore: registered new interface driver ftdi_sio [ 1.170064] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.172809] usbcore: registered new interface driver pl2303 [ 1.174892] usbserial: USB Serial support registered for pl2303 [ 1.177159] i8042: PNP: No PS/2 controller found. [ 1.179119] mousedev: PS/2 mouse device common for all mice [ 1.181585] rtc_cmos 00:03: RTC can wake from S4 [ 1.184276] rtc_cmos 00:03: registered as rtc0 [ 1.186160] rtc_cmos 00:03: setting system clock to 2024-04-03T02:24:19 UTC (1712111059) [ 1.189414] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.192870] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.193103] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 1.194357] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 1.201632] intel_pstate: CPU model not supported [ 1.203101] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.204955] sdhci: Secure Digital Host Controller Interface driver [ 1.208886] sdhci: Copyright(c) Pierre Ossman [ 1.210575] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.213021] usbcore: registered new interface driver usbhid [ 1.215179] usbhid: USB HID core driver [ 1.216683] u32 classifier [ 1.217723] input device check on [ 1.219070] Actions configured [ 1.220575] NET: Registered PF_INET6 protocol family [ 1.223291] Segment Routing with IPv6 [ 1.224776] In-situ OAM (IOAM) with IPv6 [ 1.226315] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.228865] NET: Registered PF_PACKET protocol family [ 1.230883] Bridge firewalling registered [ 1.232454] Key type dns_resolver registered [ 1.234310] NET: Registered PF_VSOCK protocol family [ 1.236906] IPI shorthand broadcast: enabled [ 1.241644] sched_clock: Marking stable (931004187, 310039298)->(1479657546, -238614061) [ 1.244987] registered taskstats version 1 [ 1.246601] Loading compiled-in X.509 certificates [ 1.251350] Key type .fscrypt registered [ 1.252897] Key type fscrypt-provisioning registered [ 1.255444] Btrfs loaded, zoned=no, fsverity=no [ 1.258213] Key type encrypted registered [ 1.260073] printk: console [netcon0] enabled [ 1.261687] netconsole: network logging started [ 1.348122] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.376944] ata6: SATA link down (SStatus 0 SControl 300) [ 1.379548] ata5: SATA link down (SStatus 0 SControl 300) [ 1.381859] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.384480] ata1: SATA link down (SStatus 0 SControl 300) [ 1.386825] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.388925] ata3.00: applying bridge limits [ 1.390741] ata2: SATA link down (SStatus 0 SControl 300) [ 1.393275] ata4: SATA link down (SStatus 0 SControl 300) [ 1.395357] ata3.00: configured for UDMA/100 [ 1.403715] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.419610] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.422086] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.442078] IP-Config: Complete: [ 1.443411] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 1.447026] host=192.168.7.4, domain=, nis-domain=(none) [ 1.453107] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.453114] nameserver0=8.8.8.8 [ 1.457310] clk: Disabling unused clocks [ 1.459412] md: Waiting for all devices to be available before autodetect [ 1.461432] md: If you don't use raid, use raid=noautodetect [ 1.463082] md: Autodetecting RAID arrays. [ 1.464331] md: autorun ... [ 1.465181] md: ... autorun DONE. [ 1.476707] EXT4-fs (vda): mounted filesystem 399ba705-9af3-46b1-b25c-353c4cc81c20 r/w with ordered data mode. Quota mode: disabled. [ 1.479799] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.481610] devtmpfs: mounted [ 1.484914] Freeing unused kernel image (initmem) memory: 3384K [ 1.486760] Write protecting the kernel read-only data: 24576k [ 1.488636] Freeing unused kernel image (rodata/data gap) memory: 916K [ 1.490051] Run /sbin/init as init process [ 1.498898] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 INIT: version 3.04 booting[ 1.502714] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 1.623087] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 1.636258] udevd[136]: starting version 3.2.14 [ 1.648097] udevd[137]: starting eudev-3.2.14 [ 1.762292] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 1.817537] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.889484] EXT4-fs (vda): re-mounted 399ba705-9af3-46b1-b25c-353c4cc81c20 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. 00:00:00.000  [c/debug/seatd/0.8.0/seatd/seat.c:39] Created VT-bound seat seat0 00:00:00.000  [c/debug/seatd/0.8.0/seatd/seatd.c:194] seatd started Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... 00:00:00.144  [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 343, uid: 1000, gid: 1000) 00:00:00.144  [c/debug/seatd/0.8.0/seatd/seat.c:170] Added client 2 to seat0 00:00:00.144  [c/debug/seatd/0.8.0/seatd/seat.c:480] Opened client 2 on seat0 [ 2.477913] weston[343]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set could not load cursor 'dnd-move' could not load cursor 'dnd-move' could not load cursor 'dnd-copy' could not load cursor 'dnd-copy' could not load cursor 'dnd-none' could not load cursor 'dnd-none' Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCaSVqVsuQGniEASDYlBkY4dyi5qwTgeFQgblqgyOoQZYTfOb2WEIhpljf5jF0KXAGh2xzRBrPExPirL5fKXR09vJJ0+S15t7OTq1MFUAMd73OvcYal09HHWwBTlyNDEz/aFj2gWMfOQdQ9Itzn8HDGwoLQe4uWW1lmYgwiK7srxCfgRK9TYtDQOExTfED+bad8LPkDisYjhLGKfwH1f8V4MhEC20MvK3GePLlHK4ynf0hlsYD8oLL43Z32LuiAES5VnXPW/wilgFRZX7VmbuuCZgC839EpF6vVbv3kcVlvycMHb5XNNrDR2pguiDWFUqb5kkZsxy9s/g82zZGNmGGN root@qemux86-64 Fingerprint: SHA256:3mCQdO8QK+LpnPD8jylqG6JhXaDAZJXbr/7AJKVmUNQ dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: [ 3.044323] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.046023] Bluetooth: BNEP filters: protocol multicast [ 3.047628] Bluetooth: BNEP socket layer initialized done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-2c9447ebf1961e777853905d4c1e016c5339f3be qemux86-64 /dev/ttyS0 qemux86-64 login: 00:01:27.567  [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 5945, uid: 0, gid: 0) 00:01:27.570  [c/debug/seatd/0.8.0/seatd/seat.c:135] Could not add client: seat is VT-bound and has an active client 00:01:27.571  [c/debug/seatd/0.8.0/seatd/client.c:177] Could not add client to target seat: Device or resource busy